3G-Stick Connection User Guide
Before you can contact the Easypad to the Internet via 3G stick, it is necessary to turn off the PIN code on the SIM card. Please do this with a mobile phone and follow the instructions.
Turn on your EasyPad: 3
Turn on the “Settings” - “Wireless & Networks” function “wcdma”: 4
Turn your Easypad off. Connect your 3G stick to the USB port on the Easypad. Remember that you are doing this with the PIN disabled. Turn your Easypad on.
Wait until you see the status bar: 6
Navigate to “Settings” - “Wireless & Networks” - “Mobile networks” to the menu item “Access Point Names”.
Tap the program menu key (status line above next to the little house) and select below this “New APN”: 2 8 1
Enter the information provided by your network operator data.
After you have entered the data, now press the large menu button beside the display.
You can then click on the point on the right side – the inner part turns green: 11
Now switch off your Easypad and then on again – 3G is now active. If in future you turn on your Easypad with the 3G stick inserted, it will automatically be activated.
