Specifications

18
Number Icon Description
9
Battery indicator
10
Zoom bar
11
Picture remain
12
Capture mode icon
4.2 Using the self-timer function
Use the self-timer function to set a delay between the moment you
press the shutter and the moment the picture is actually captured. A
delay of 3 or 10 seconds can be set. This function can be used in
both capture and recorder mode.
To set the Self-timer:
1. Turn the camera on.
2. Press the 5-way controller
left to select from Off, 3 sec,
or 10 sec. The selected
timer will be shown on the
center of the LCD screen.
3. Press the Capture or Record button to start counting
down.
4.3 Setting the Flash mode
When you start to take a picture, presses the 5-way controller up to
switch between Flash modes.