Operation Manual

9. Exit
Select Exit to exit SETUP and back to Function menu.
• Exposure value
Select EV mode and press OK button to confirm.
Exposure compensation helps you increase or decrease the EV to adjust the results. This feature
is applied to render the subject appropriately.
The adjustment unit is 1/3, within the range –2EV ~ +2EVʳ
You can check the result of the compensation by viewing the image on the screen.
• Take Continuous Pictures
Select Take Continuous Pictures and press the OK button to confirm. The icon will appear on
the bottom left corner of the screen.
Move the microscope to aim at the target. The target will show on the screen.
Hold the microscope firmly and gently press the shutter button to take a picture.
Back to the function menu, select , press OK button to go back to Single-shot Mode
• DC MODE
Select the DC Mode button and press the OK button to confirm. Press the OK button to take a
picture.
7. Playback
Turn on the microscope. Press the Playback button you will see some
pictures on the screen. Then press the POWER button to playback
mode.
- 10 -