User's Manual

13
En
g
lish
4) Setting Audio (Default setting is ON)
Set the working mode to video mode
, then press (MENU) button to enter into video
menu. Use 5-direction button to select
(Audio) for setting its property and press (OK) to
confirm. The icon
will appear on the display when the voice is turned off.
Note:
There will be no voice output from your file if the voice is turned off.
5) White Balance (Preset as auto white balance)
Set the working mode to video mode
, then press (MENU) button to enter into video
menu.
Use 5-direction button to select White Balance for setting its property and press (OK) to
confirm.
Five white balance modes are provided for your selection:
(AUTO): The video camera will adjust the white balance automatically. The
users are recommended to adopt this mode, except that the
lighting is of great difference from the normal conditions.
(Daylight): Suitable for outdoor environment where the sunshine is very
strong.
(Tungsten): Suitable for indoor environment where tungsten lamp illuminates.
(Fluoresce): Suitable for indoor environment where fluorescence lamp
illuminates.
(Cloudy): Suitable for cloudy environment.
6) Setting Stabilizer
Set the working mode to video mode
, then press (MENU) button to enter into video
menu. Use 5-direction button to select (Stabilizer) for setting its property and press (OK) to
confirm.
(On): When anti-shake function is activated, the icon
will appear on the display. This
function is used to reduce the shiver caused to the picture due to shaking of your hands
during shooting. It is suggested to activate this function when shooting a quick-moving
object
(Off): To deactivate the anti-shake function.