User's Manual

lish

Set the working mode to shoot mode then press (MENU) button to enter into shoot

menu. Use 5-direction button to select (Quality) for setting its property and press (OK) to

confirm.

Exit the menu and return to preview mode. The new setting will be shown on the display.

Three quality modes are provided for your selection:

(Super) The image quality is best but the image file is largest.

(Fine) The image quality is good but the image file is comparatively large.

(Normal) The image quality is average but the image file is small.

6) Setting the White Balance

Set the working mode to shoot mode

then press (MENU) button to enter into shoot

menu. Use 5-direction button to select (White Balance) for setting its property and press

(OK) to confirm. Exit the menu and return to preview mode. The new settings will be shown

on the display.

Five white balance modes are provided for your selection:

(AUTO): The video camera will adjust the white balance automatically. The

users are recommended to adopt this mode, except that the

lighting is of great difference from the normal conditions.

(Daylight): Suitable for outdoor environment where the sunshine is very

strong.

(Tungsten): Suitable for indoor environment where tungsten lamp illuminates.

(Fluoresce): Suitable for indoor environment where fluorescence lamp

illuminates.

(Cloudy): Suitable for cloudy environment.

7) Setting the Capture Mode (Preset as Single Shot)

Switch the working mode to shoot mode

, then press (MENU) button to enter into shoot

menu. Use 5-direction button to select (Capture Mode) for setting its property and press

(OK) to confirm. Exit the menu and return to preview mode. The new setting will be shown

on the display.

Four modes are provided for your selection:

(Single): Each full press of shutter button will shoot one photo.

(Sequence): Each full press of shutter button will shoot three Photos.

(10S Timer): After full press of shutter button, the system will shot automatically after 10-

second delay and the self-shot indicator in front will prompt you that the system is waiting.

(20S Timer): After full press of shutter button, the system will shot automatically after 20-

second delay and the self-shot indicator in front will prompt you that the system is waiting.