User's Manual

17
En
g
lish
12) Setting the EV (The preset value is 0)
You may use this function to adjust the brightness of the photo you shot. Please switch the
working mode to shoot mode
, then press (MENU) button to enter into the menu. Select
(EV) and press (OK) to enter into preview mode for exposure compensation setting.
Use (LEFT) or (RIGHT) direction button to select your desired setting and press (OK) to
confirm. Corresponding exposure compensation effect will be shown on the display.
A range from +2.0 to -2.0 (with 0.5EV as the unit) is provided for selection of the exposure
compensation value.
13) Setting the Quick View (The preset value is ON)
Switch the working mode to shoot mode
, then press(MENU) button to enter into shoot
menu. Use 5-direction button to select (Quick View) for setting its property and press (OK)
to confirm.
(ON): If this function is turned on, the photo will be quickly shown on the display after you
finish one shot.
(OFF): If this function is turned off, the photo will not be quickly shown on the display after
you finish one shot.
14) Setting the Photo Frame
Switch the working mode to shoot mode
, then press (MENU) button to enter into shoot
menu. Use 5-direction button to select (Photo Frame) for selecting from five types of photo
frame. Press (OK) to confirm and return to preview mode. The picture frame currently
selected will appear on the display and the photo you shot will automatically inlaid into the
frame.
15) Setting 2 in 1
Switch the working mode to shoot mode
, then press (MENU) button to enter into shoot
menu. Use 5-direction button to select (2 in 1) for setting its property and press (OK) to
confirm. The icon will appear on the display. This function is used to combine two different
images into one complete picture.