User's Manual

21
En
g
lish
photo. An icon will appear on upper left of the display, in which there is a blue-colored
rec
tangular frame prompting the cut area. Press 5-direction button to select an area and
press
(OK). The area in rectangular frame will be cut to form a separate photo and show on
the display.
10
) Setting Slide Show
Set the shoot/playback mode switch to playback mode
, then press (MODE) to switch to
pho
to playback mode. Only the photo and movie are allowed for continuous play.
a.) Press (OK) to switch to enlarged playback of any photo and press (MENU) to enter into
playback
menu. Use 5-direction button to select Slide Show. An icon will appear on upper
right of the
display, in which case you enter into continuous playback.
b.) Press SHUTTER button to start slide show of photo. Press (OK) to pause and press
SHUTTER
again to exit the continuous playback mode.
3.1.5 Setting Mode
Set the
shoot/playback mode switch to shoot mode
, then press (MENU) button to enter
in
to the menu. Press RIGHT button to enter into (SETUP) menu list. Use 5-direction button
to select the function you want to set. Press (OK) to confirm the setting and exit the menu.
1)
Set Time
a.) Select (Time Setting) and press (OK) to enter into SET CLOCK window.
b.) Use (UP/DOWN) button to change the time.
c.) Use (LEFT/RIGHT) button to confirm and move to next digit.
d.) Press (OK) to confirm the setting.
2) Formatting Memory Card
A new SD card shall be firstly formatted before use.
a.) Select (Format) to enter into property list.
b.) Select “NO” to cancel the formatting. Select “YES” and press (OK) to execute the
formatting.
c.) All the contents in the memory will be cleared after formatting.
3)
Setting Auto Power Off (The preset value is 3 minutes)
Sett
ing Auto Power Off function can save unnecessary consumption of battery power.
a.) Select (Auto Power Off) to enter into property list.
b.) To cancel Auto Power Off function, select Auto Power Off time after stop of all operations,
i.e. 1-minute, 3-minute, 5-minute or OFF.
c.) Press (OK) to confirm the setting.