User's Manual

22
En
g
lish
4) Setting Beep (The preset value is ON)
a.) Select (Beep) to enter into property list.
b.) Select “ON” to turn on the beep sound upon each press. Select
“OFF” to cancel the beep
sound.
c.) Press (OK) to confirm the setting.
5) Setting USB Mode (The preset value is memory)
a.) Select (USB MODE) to enter into property list.
(Mass Storage): The video camera is connected to the computer via USB. You can operate
the memory as on the hard disc, for example, copy, cut, delete or download photo, movie or
voice from the video camera.
(PC-Camera): The video camera is connected to the computer via USB. You can use it as a
PC-Cam in video instant communication tools like NETMEETING or OICQ.
b.) Press (OK) to confirm the setting.
6) Setting Logo Display (The preset value is ON)
a.) Select (Logo Display) to enter into property list.
b.) Selecting “ON”, the welcome banner will be firstly displayed upon each start of the video
camera. Selecting “OFF”, the video camera will be directly started without displaying the
welcome banner.
c.) Press (OK) to confirm the setting.
7) Setting Language
a.) Select (Language) to enter into property list.
b.) Select your desired language and press (OK) to confirm the setting.
8) Setting Video Out
a.) Select (Video Out) to enter into property list.
b.) Select your desired video output system. The system available for your selection includes
PAL and NTSC.
c.) Press (OK) to confirm the setting.
9) Default Setting
a.) Select (Default Setting) and press (OK). Then, select “YES” to resume all settings to
factory default value, or select “NO” to cancel the operation.
b.) Press (OK) to confirm the setting.
10) Media Selection
a.) Select (Media Select) to enter into property list.
(Internal Flash): The current memory is internal.
(External Card): The current memory is an external memory. This video camera supports
SD card.
b.) Press (OK) to confirm the setting.