English 1
English Preface Many thanks for your selection of our products. Before use, please thoroughly read this manual to ensure you can enjoy every function of this machine and keep it long under normal service. Please also keep this manual properly for future reference during use.
English Contents 1 Introduction .......................................................................................................................... 4 1.1 Accessories ................................................................................................................ 4 1.2 Components and Names ............................................................................................. 5 2 Get Video Camera Ready .............................................................................
English 1 Introduction The video camera you select and purchase is a digital video device integrating high-quality digital video camera, digital camera, super MP3, digital pen recorder and PC-Cam. It will bring you endless new experiences in digital video. 1.
English 1.
English 17 Cradle Connection Hole 18 External MemoryCard /Battery Cover 19 Battery 20 Battery Lock 21 Storage Card Slot 22 Cradle Connector 23 DC Input Port 24 USB Port 25 Audio/Video Output Port Note: The bundled AC Adaptor output voltage is 5V, 1.0A. Please only use the bundled AC Adaptor.
English 2 Get Video Camera Ready 2.1 How to Turn ON/OFF the Power of Video Camera 2.1.1 Installing Battery This video camera uses rechargeable lithium ion battery. Please refer to following procedures for correct installation of the battery: 1) Move the battery lock along direction to open the card/battery cover. 2) Install the battery into the battery cell as directed and ensure the battery lock is fastened after the battery is inserted. Before installation, confirm the polarity is correct.
English Note: This camera also supports USB charging. 1) Insert the video camera into the base 2) Use the bundled USB cable to connect between the base and computer. Switch on the computer. 3) The charging indicator will become red when it starts charging. 4) Wait until the charging indicator turns into green, indicating that the battery is fully charged. 2.1.4 Removing Battery 1) Move the battery lock along direction to open the card/battery cover.
English 2.2 Installing and Removing SD Card It is suggested to use SD card if you need an external memory card to expand the storage capacity of your video camera. Installing SD Card 1) Turn the video camera off and open the card/battery cover. 2) Insert the memory card into the slot as shown below, until you hear a click. 3) Slide and close the card/battery cover. Removing SD Card 1) Turn the video camera off. 2) Slide and open the card/battery cover. Press the SD card inward. The card will eject out.
English 2.3 Using LCD Display When recording the images, you can view the pictures from LCD display. From this display, you can also view the contents recorded before. 1) Open the LCD display. 2) Adjust the angle of LCD display according to the recording/play angle required. To its maximum, the display can be rotated to following angle: 90 in open/close, 180 in forward direction and 90 in reverse direction.
English Shooting 1) Shooting Status 2) Scenery Indication 3) Battery Power 4) Exposure Compensation 5) Memory Card 6) Date Stamp 7) Digital Zoom 8) Photo counting [Recorded/Recordable] 9) Microspur Status 10) Photo Size 11) Self-shot Indication 12) Photo Quality 13) White Balance Mode 14) Flash Mode Voice Recording 1) Voice Recording Status 2) Battery Power 3) Memory Card 4) Recorded/Recordable Time 11
English 3 Use the Video Camera The main functions of this digital video camera include six modes, i.e. video capture, photo taking, voice recording, playback, MP3 play and browser. In this chapter, we will introduce the functions and use of video camera based on these modes. 3.1 Working Modes 3.1.1 Video Capture The system will automatically enter into video capture mode after the video camera is started.
English 4) Setting Audio (Default setting is ON) Set the working mode to video mode , then press (MENU) button to enter into video menu. Use 5-direction button to select (Audio) for setting its property and press (OK) to confirm. The icon will appear on the display when the voice is turned off. Note: There will be no voice output from your file if the voice is turned off. 5) White Balance (Preset as auto white balance) Set the working mode to video mode , then press (MENU) button to enter into video menu.
English 3.1.2 Shooting The photo you shot will be saved in JPEG format. Turn on the video camera and press (MODE) button. Shoot mode is selected when the icon appears on upper left of the display. Find the view from LCD display under shooting preview status. Hold your camera and fully press down the shutter button to complete the shooting. The green indicator starts to blink after the shutter button is released. You can proceed to next shot after the green indicator stops blinking.
English Set the working mode to shoot mode then press (MENU) button to enter into shoot menu. Use 5-direction button to select (Quality) for setting its property and press (OK) to confirm. Exit the menu and return to preview mode. The new setting will be shown on the display. Three quality modes are provided for your selection: (Super) (Fine) (Normal) The image quality is best but the image file is largest. The image quality is good but the image file is comparatively large.
English 8) Setting the Date Stamp (The preset value is OFF) Switch the working mode to shoot mode , then press (MENU) button to enter into shoot menu. Use 5-direction button to select (Date Stamp) for setting its property and press (OK) to confirm. (ON): If this function is turned on, the date will be stamped on the lower right of the photo after each shot. (OFF): If this function is turned off, there will be no date stamp on the photo you shot.
English 12) Setting the EV (The preset value is 0) You may use this function to adjust the brightness of the photo you shot. Please switch the working mode to shoot mode , then press (MENU) button to enter into the menu. Select (EV) and press (OK) to enter into preview mode for exposure compensation setting. Use (LEFT) or (RIGHT) direction button to select your desired setting and press (OK) to confirm. Corresponding exposure compensation effect will be shown on the display. A range from +2.0 to -2.
English 3.1.3 Voice Recording Please set the shoot/playback mode switch to shoot mode . Twice pressing (MODE) button, the camera will enter into preparing status for voice recording. Press the shutter button to start voice recording. The voice-recording indicator in the front of the camera will be bright and the time recorded will be shown on the display. Press the shutter again to stop voice recording. The length of voice recording depends on the storage of memory card. 3.1.
English 3) Setting the Lock To prevent the user from deleting the file by error, the video camera provides file lock function. a.) Set the shoot/playback mode switch to playback mode , then press 5-direction button to select the photo, movie or voice you want to lock. Press (MENU) to enter into playback menu and then use 5-direction button to select (LOCK) menu. b.) In the property list, it is provided with four operations, i.e. (Lock one), (Unlock one), (Lock All) and (Unlock All).
English 7) Setting the Rotation Set the shoot/playback mode switch to playback mode , then press 5-direction button to select the photo you want to rotate. Press OK to switch to enlarged playback and then press MENU to enter into playback menu. Only the photo can be set for rotation. a.) Select Rotate from playback menu and press (OK). The system will automatically jump to will appear on lower left of the display. enlarged playback mode and the icon b.
English photo. An icon will appear on upper left of the display, in which there is a blue-colored rectangular frame prompting the cut area. Press 5-direction button to select an area and press (OK). The area in rectangular frame will be cut to form a separate photo and show on the display. 10) Setting Slide Show Set the shoot/playback mode switch to playback mode , then press (MODE) to switch to photo playback mode. Only the photo and movie are allowed for continuous play. a.
English 4) Setting Beep (The preset value is ON) a.) Select (Beep) to enter into property list. b.) Select “ON” to turn on the beep sound upon each press. Select “OFF” to cancel the beep sound. c.) Press (OK) to confirm the setting. 5) Setting USB Mode (The preset value is memory) a.) Select (USB MODE) to enter into property list. (Mass Storage): The video camera is connected to the computer via USB.
English 11) Setting LCD Brightness a.) Select (LCD Brightness) and press (OK). An indication bar for brightness adjustment will be shown on the menu interface. b.) Use (LEFT/RIGHT) button to adjust the screen to your desired brightness. c.) Press (OK) to confirm the setting.
English 12) Setting Flicker Frequency This video camera provides two light frequencies for your selection. There are two different light frequencies 50Hz and 60Hz for different area. This function is designed for avoiding camera LCD display flicker. Please set the option according your area.
English 3.1.6 MP3 Play This video camera is provided with MP3 play function. You can listen to music by earphone (recommended to use earphone) or directly by the loudspeaker output from the camera. Note: The MP3 files must be put under MP3 directory of the memory; otherwise they cannot be played. a.) Turn on your video camera after copying MP3 files. Set the shoot/playback mode switch to playback mode and then press (MODE) to switch to MP3 list. b.
English 3.1.7 Browser Mode Set the shoot/playback mode switch to playback mode, then press (MODE) to switch to browser mode, where you can quickly browse the photo, movie, voice and MP3 files you have recorded. a.) Use 5-direction button to select the file folder or a single file. b.) To edit a file, you can select this file and then press RIGHT button. An icon “√ ” will be shown on the display to prompt that the file is selected. c.
English 4 Functions Related to Computer Preparations To use the functions related to computer, you need to install video camera software and connect the video camera to the computer. Minimum Requirements for computer: • Computer with MMX Pentium 233MHz or faster CPU • Operating System: Windows 98/98SE/2000/ME/XP • Available disk space: at least 100MB. • USB Port • CD-ROM Drive • 800x600 pixel or higher, compatible display with 16-bit colors (24-bit color display is recommended) 4.
English English 5 Precautions on Use 5.1 About Safety Full consideration has been made to the safety of this product. But to ensure correct use, you are still requested to read the following warnings and precautions thoroughly. Warning: • Please do not tear down, modify or repair the video camera by yourself. • Please contact your dealer for repair and internal inspection. • Please do not shock or knock the video camera fiercely.
English 5.3 About Battery and Charging • • • • • Long storage of batteries in the video camera, even not in use, will cause the battery power to decrease. And long connection of the batteries to the video camera will cause excessive discharge, in which case the battery cannot be used even it is recharged. Therefore, if you do not use your video camera, please remove the batteries and put them in a cool and dry place with relatively stable temperature.
English English 6 Troubleshooting Problem The camera cannot be turned on. Cause - If the power is correctly connected. - If the power is fully charged. The power is OFF during use - If setting Auto Power Off. - If Auto Power Off is set, the Video camera will be OFF automatically in case of no operation after a period of preset time. - Ambient temperature is too low. - If the battery is charged full. - If the battery is beyond its service life.
dark. LCD display is not clear value is incorrect. LCD display is dirty. The image cannot be downloaded to the computer. - Cable connection is incorrect. - The operating system is not Windows 98/98SE/2000/ME/XP or the computer has no USB port. - Window 98 is installed with USB driver. compensation. Clean it with dry and soft cloth. - Check the cable connection. - Install Windows 98/98SE/ 2000 /ME /XP and USB port.
English En lish 7 Product Specifications Image Sensor Lens Image Size 1/1.8-inch CMOS, 5,000,000 pixel f=8.22mm F=2.8 3648 x 2736 10 mega pixels / 3264 x 2448 8 mega pixels 2560 x 1920 5 mega pixels 2048 x 1536 3 mega pixels 1600 x 1200 2 mega pixels 0.3 mega pixels 640 x 480 Digital Zoom LCD Display Focus Focus Range Shutter Shutter Speed Exposure Max. 8x 2.0-inch LTPS color LCD (640X240) Fixed focus 1.
8 Security and disposal advise Caution: Danger of explosion at improper exchange of battery/accumulator. Disposal of used batteries/accumulators according to instructions. Attention: Remark regarding separation from mains. To separate the device completely from mains plug has to be pulled from the mains socket. Therefore the device has to be set up in a way that an unobstructed access to the mains socket is ensured, so that the mains plug can be pulled immediately in case of an emergency.
