Operation Manual

29
You can use the “video/audio out” on the digital video camera to output the video/audio to an
external device (such as: TV), the method is as below:
●Step one Insert the black plug of the TV cable to the TV port on the back of the digital video
camera, and the yellow plug to the video in of the TV.
●Step two Insert the white and red plug of the AV cable to the audio input of the TV port, and
the black plug to the back of the audio in/out port on the digital video camera.
● Step three Switch the TV to the correct channel.
● If the TV standard is not correct, you can switch to the appropriate standards
1.Enter the “Setup mode” page.
2. Use the up button ▲ and down button ▼ to select “video out”.
3. Then use the up button ▲ and down button ▼ to select NTSC or PAL standards and
press the confirm button ■.
Note:
Different TV manufacturers will have different broadcast channels, please refer to the
TV’s user manual.
5. Video output
PDF created with pdfFactory trial version www.pdffactory.com