User Manual 1
Thank you for buying the GoXtreme WiFi action camera. Before start using this product, please read this manual carefully to maximize its performance and extend the life of the product. Appearance and Buttons 1. 2. 3. 4. 5. 6. Shutter button LCD display Power / Mode button Lens Wi-Fi switch and status indicator (red) Microphone 2 7. LED light 8. Micro HDMI port 9. Micro USB port 10. Micro SD card slot 11.
LCD Display Illustration Turn on the GoXtreme WiFi, the LCD will display the following status and settings: 1. Camera mode 2. Video recording mode (default) 3. Wi-Fi icon (display when enabled) 4. TF card icon (display when loaded) 5.
8. Timer, displays hours and minutes. 9. Battery icon: current battery level of the camera. Note: the above icons may vary according to the status of the GoXtreme WiFi.
High speed card at least Class 4 is recommended; Turn off the DV before inserting or removing the card. 2. Charging the battery. The DV uses built-in rechargeable lithium battery. When the DV is off, connect it to the PC via USB cable to charge the battery. During charging, the status indicator (blue) will light on, and the indicator off when charging completes. Note: When the DV is on, connecting it to the PC will not charge. Turn on/off 1.
2. Turn off: press and hold the button for about 3 seconds, LCD displays “OFF” and a beep can be heard from buzzer. Note: The DV will turn off automatically if it is idle for 5 minutes. Start to Use Default setting: After turn on the GoXtreme WiFi, the default setting is as below: HI Video recording mode icon Video resolution The DV is in video recording mode. FHD: 1080p@30fps Recording time Stands for 0 hour and 00 minute. TF card icon Display when a TF card is inserted, otherwise no display.
Wi-Fi icon Display when activated. The GoXtreme WiFi provides different shooting modes. Press the button repeatedly, the following mode will display in turn: HI stands for FHD (1920x1080,30 fps) video Video Lo stands for 720P (1280x720,30 fps) video HILO stands for 720P (1280x720,60 fps) video Photo Continuous shot Self-timer 1.
stop automatically, and the recorded video will be saved before the DV turns off. After reaching a max. video recording time of 29 minutes the camera will automatically stop. It can only be restarted manually. 2. Photo To take a photo, please check whether the DV is under Camera mode. If the icon is not displayed on the screen, press the button repeatedly until it appears. Press and release the button, a beep will be heard and the red indicator will flash, meaning a photo is taken.
4. Enable/disable Mute mode The buzzer is enabled by default. Under the Video or Photo mode, press and hold the Shutter button to disable the buzzer and indicator to enter Mute mode. Under Mute mode, the icon will display on the screen; press and hold the Shutter button again to exit Mute mode. Buzzer is enabled by default When Mute mode is enabled, the Mute icon will display on LCD 5. Connecting to HDTV 5.
Note: Before connecting or removing the HDMI cable, please stop video recording, playback and disconnect Wi-Fi first. 5.2 When HDTV is connected, it enters Playback mode, the LCD displays as below: 1 2 3 S/N 1 2 3 Icon name Description Playback mode Under Playback mode currently. There are 31 files and you are viewing the 19th File number one. Video icon The file is a video. In Playback mode, press the Power button to switch between photos and videos.
In Playback mode, press and hold the Shutter button , a prompt of deleting the file or formatting will appear. Press the Wi-Fi button to switch between deleting or formatting, then press the Power button button to select Yes or No, and press the Shutter to confirm and exit. 6. Connecting to PC 6.1 Turn on the DV and connect it to the USB port of the PC via the attached USB cable.
6.2 In U-disk mode (PCU mode), press the Shutter button to switch to web cam mode (PCC mode), and the LCD will display as below: Now you can start the web cam through application. To return to U-disk mode (PCU mode), press the button again. Note: Driver is not required for web cam mode (PCC mode) on Windows XP (SP3) version or above. APP (support Android and iOS) 1. How to install an APP 1.
2. Android APP 2.1 Install SYMAGIX APP (provided by dealer or via internet) on Android phone or tablet. When installation completes, the LCD will display icon . 2.2 Insert the TF card and turn on the DV, then press the Wi-Fi button to enable it. Now you can see the Wi-Fi icon on the LCD. 2.3 Enable Wi-Fi on Android phone or tablet and search for wireless AP signal “GoXtreme WiFi”, then connect it to DV, until the system displays “Connected successfully”. 2.
3. iOS APP 3.1 Install SYMAGIX APP (provided by dealer or via internet) on iOS phone or tablet. When installation completes, the LCD will display icon . 3.2 Insert the TF card and turn on the DV, then press the Wi-Fi button to enable it. Now you can see the Wi-Fi icon on the LCD. 3.3 Enable Wi-Fi on iOS phone or tablet and search for wireless AP signal “GoXtreme WiFi”, then connect it to DV, until the system displays “Connected successfully”.
Note: 1. A TF card must be inserted if you need to take a photo, record a video or download files on the terminal. 2. The Wi-Fi indicator will remain on when the terminal is connected to DV. DECLARATION OF CONFORMITY easypix herebly declares that the product GoXtreme WiFi is in conformity to all the essential requirements of Directive 1999/5/EC. The declaration of conformity can be downloaded here: http://www.easypix.info/download/pdf/doc_goxtreme_wifi.
