Operation Manual

10
2.1 Installing the wrist strap
● Put one end of the wrist strap
through the mount.
● Put the other end of the wrist
strap through the first end.
● Tighten.
2.2 Loading the Batteries
● Please switch the camera off.
● Before using, please insert two AAA-size alkaline batteries or rechargeable
batteries correctly according to their indicated polarity. Please check the charge
of the batteries. Replace the batteries if their charge is insufficient, so as to ensure
that the camera functions normally.
※ When using your digital camera, if the battery charge is weaker than 2.3V（one
mark on the battery level icon), you will not be able to operate the flash; if the
battery charge is weaker than 2.2V (red on the battery level icon), the camera will
turn off automatically.
● Open the battery cover in the direction as indicated.
● Please load the batteries correctly according to the polarity icons as indicated on
the inside of the battery cover.
Getting started