Operation Manual

13
● Slide the power cover on the top of the camera sideways to start-up, Switch the
power on and off. When the camera is switched on, the red indicator light will
flash, an image will appear on the LCD display.
※ This camera comes with three power saving options: Off, 1 minute, 3 minutes. If
the camera remains on and inactive throughout the preset power saving period,
the camera will automatically switch off. To switch it on again, slide the power
cover in the “off”, and “on” directions successively.
※ The following functions, irregardless of whether they are switched off manually
or automatically, will retain the last settings before the camera was turned off,
unless reset to factory settings at “Setup mode”:
1.Resolution 2.Image quality 3.Language setting 4.White balance 5.EV 6.Frequency
7. PC connection mode
2.5 Changing modes
The camera can be switched to the following operating modes: ”Playback mode”,
“Photo mode”, “Movie mode”, “Setup mode”, ”PC mode”, “Games mode” and
other features. Press and hold on to the Mode selector button for two seconds to
access the modes Main menu. Use the Up/ Down selection buttons to highlight the
options then press the Set/ Function button to confirm.
Mode selector
button
PC mode
Setup mode
Playback mode
Photo mode
Games mode
Video mode