User manual

2009/07/16
Page 15
Venus T5
3.1.3 Basic RAID Configuration
JMicron HW RAID Manager provides users to do the basic RAID configuration to the connected disks
in this page. According to the number and capacity of the connected disks, JMicron HW RAID Manager
will provide the available RAID type for users to select. When the user select his/her desired RAID type,
JMicron HW RAID Manager will automatically select the available disks to build the RAID and
calculate the RAID capacity. It will show the selected disks charts drawn in the cross pattern on the right
part.
For example, if the user selects RAID 10, JMicron HW RAID Manager will select four available disks
to build RAID 10 starting from the lower Disk number. At the mean while, it will calculate the smallest
disk size to build RAID and calculate the total capacity of the RAID.
Figure 17 – Create RAID 10
If the user wants to set the password for the new RAID, he/she could check the password group box and
enter the password.