User manual

2009/07/16
Page 5
Venus T5
---Front Panel--- (see Figure 4)
Figure 4
D1:Temperature LED
D2:Fan LED
D3---D7: HDD Access and failure LED (Green LED
is lighting when HDD link and blinking
when HDD access; the LED will turn red
when HDD failed. The green LED and red
LED will alternate during rebuilding)
D8:SYS LED: Lighting while system is ready
D9:SYS Reset or Backup (option)
D10:HDD Safety Lock
D11:Power LED
D12:Power Safety Lock (The safety lock prevent
it bouncing out while HDD is working)
D13:120W Switching Power Supply
---Rear View--- (see Figure 5)
Figure 5
E1:Cooling Fan #1 (8x8cm)
E2:Fan Speed Control FAN RPM HIGH(3600rpm)&
LOW(2800 rpm) Options(If you want the fan to
run at a high speed ,switch to the right; otherwise
, switch to the left
E3: Cooling Fan #2 (8x8cm)
E4: Reset/Change Mode (push button less than 2
seconds for system reset / hold button over than
2 seconds for apply new RAID mode)
E5:RAID CONFIGURE SW
E6:ESATA
E7:Power SW
E8:Power Input(AC 100V-240V)