User`s manual

DC-200 RAID card User’s Manual
E16/E43
You can move the cursor and press the spacebar to select source HDD
in the RAID array, after that, target HDD will be selected automatically.
And the system will remind you that data in the target HDD will be lost if
you continue this process. Press ‘y’ to continue and a new window will
show the rebuilding speed, source HDD and target HDD.
Note:
In RAID 0+1 array with 1 card, the RAID structure is PM-SM, PS-SS
RAID 0, PM-PS, SM-SS RAID 1.
In RAID 0+1 array with 2 cards, the RAID structure is 0PM-0SM,
1PM-1SM RAID 0, 0PM-1PM, 0SM-1SM RAID 1. (0, 1 means card 1
and card 2 respectively).
When you rebuild RAID 0+1, you must choose the mirrored HDD of
the failed HDD to be source HDD, otherwise, system will have problem.
3.2.6 Exit
Select this item to exit DC-200 RAID card BIOS configuration
screen.