User`s manual

DC-200 RAID card User’s Manual
E32/E43
6. GUI (Graphic User Interface)
GUI stands for Graphic User Interface. GUI function offers user-friendly
graphics in Windows operating systems for easy RAID array monitoring and
storage management. After you install the DC-200 RAID card and HDDs,
create RAID arrays in BIOS configuration, execute ‘FDISK’ and ‘format’
command in DOS mode and install drivers for your operating system, you can
take the following steps to setup the GUI in Windows operating systems and
execute GUI functions.
6.1 GUI setup
You’d better set your screen display resolution rate as 800X600 or
1024X768 to avoid display abnormality during GUI setup.
1. After you power on your computer and bootup Windows, insert the GUI
disk into drive A.
2. Click ‘floppy (A:)’ at ‘my computer’.
3. Execute Setup.exe which is located in the root directory.