User`s manual

DC-200 RAID card User’s Manual
E40/E43
7. Troubleshooting tips:
The following tips are general troubleshooting procedures:
1. Check that the DC-200 RAID card is seated evenly all the way into the PCI
slot.
2. Check that the PCI expansion slot is 5V and compliant with PCI 2.2 or
previous version and supports Bus Mastering.
3. Check that DC-200 ATA 100 RAID card is detected during booting by
looking for the BIOS message from the screen. If it is not detected, try to
move it to another free PCI slot.
4. Check that all ATA cables and power cables are connected properly.