Specifications

OfficeServ 7200 System Description

3.4 Rings and Tones

3.4.1 Ring Cycles

The OfficeServ 7200 provides the trunk line rings, station rings, door rings, and alarm rings.

The ON/OFF cycle of each ring is shown in the table below:

(It is different according to a country and available to be modified by the software)

Table 3.22 System Ring Cycles

Ring ON/OFF Cycle

Trunk line ring 1000/2000 ms

Station ring 400/200/400/3000 ms

Door ring 400/200/400/200/400/2000 ms

Alarm ring 400/200/400/200/400/200/400/1000 ms

Ring ON/OFF Cycle

The ON/OFF cycle can be adjusted by changing the values of the system

database.

3.4.2 Ring

The output voltage and frequency of the ring signals in the OfficeServ 7200 are as follows:

 Output voltage: 75 Vrms Square Wave (Built in SLI)

75 Vrms External Sinewave (Italy, Australia)

 Frequency: 20 or 25 Hz

The OfficeServ 7200 provides the users with various tones to notify the users of the status

of functional operations and give feedback to the users. The ON/OFF cycles of currently

specified tones are shown in the table next page: