Specifications

CHAPTER 2. Hardware of the OfficeServ 7200
2-2 © SAMSUNG Electronics Co., Ltd.
Maintenance
The OfficeServ 7200 hardware is designed to be maintained with ease and safety.
 The specifications of the 19-inch rack are followed. The rack is designed to maintain
sufficient strength.
 The installers or maintainers can connect cables easily because external ports exist on
the front panel.
 The front of each module has an LED that indicates failures or the operation status so
that the operator can easily identify system failures.
 The back of the rack has a ground hole to which a wrist strap for preventing static
electricity can be connected.
 The OfficeServ 7200 hardware is designed to prevent electronic devices from being
damaged due to an external environment while installation or maintenance operation is
being made.
Fire Resistance and Heat Processing
The OfficeServ 7200 hardware is made of fire-resistant materials and parts to protect the
hardware from fire.
The OfficeServ 7200 hardware is designed not to affect the system performance due to heat
generated from inside of the system.
 A specific heat-generated part of the hardware is blocked in order not to affect the
temperature-sensitive components.
 Two 80 mm fans for cooling are installed to exhale internal air to the outside.
 The parts installed into the modules are located based on heat distribution.