Specifications

OfficeServ 7200 System Description
© SAMSUNG Electronics Co., Ltd. 2-5
2.2.1 Slot Configuration
There are 6 slots available for mounting boards in each of the basic cabinet and extension
cabinet. The following table shows mountable boards for each slot of the cabinet.
Table 2.1 Boards that is available to mount in slots
Cabinet Slot Mountable Boards
Slot 0 MP20 , MP20S
Slot 1 All boards except for MP20, MP20S, LCP, TEPRIa,
LIM, PLIM, PLIM2, GPLIM, GPLIMT, GSIM and
GSIMT
Slot 2 All boards except for MP20, MP20S, LCP, TEPRIa and
WIM
Basic Cabinet
(OfficeServ Access)
Slot 3, 4, 5 All boards except for MP20, MP20S, LCP, and WIM
Slot 0 LCP only
Slot 1 All boards except for MP20, MP20S, LCP, TEPRIa
LIM, PLIM, PLIM2, GPLIM, GPLIMT, GSIM and
GSIMT
Slot 2 All boards except for MP20, MP20S, LCP, TEPRIa and
WIM
Slot 3 All boards except for MP20, MP20S, LCP, and WIM
Expansion Cabinet
(OfficeServ Expansion)
Slot 4, 5 All boards except for MP20, MP20S, LCP, TEPRIa and
WIM
 The WIM can be mounted only on slot 1 of the basic and expansion cabinets.
 The TEPRIa can be only mounted on slots 3, 4 and 5 of the basic cabinet and Slot 3 of
the expansion cabinet.
 The LIM, PLIM, PLIM2, GPLIM, GPLIMT, GSIM and GSIMT cannot be mounted
on slot 1 of the basic/expansion cabinet.
 One GPLIMT can be mounted to each cabinet. When using an external rectifier, up to
2 boards can be mounted. Mounting and using the board above the restricted capacity
may overload and damage the PSU.
 The OAS can be mounted on slots 1, 2, 3, 4, and 5 of the basic and expansion cabinet.
If the OAS is mounted on one of the slot 1 and 2, no board can be mounted on the
other slot. If any board is mounted on the other slot, the board will not work. (If the
slot 1 is occupied with the OAS, the slot 2 should be empty. And if the slot 2 is
occupied with the OAS, the slot 1 should be empty.)