Specifications

OfficeServ 7200 System Description

The components on the front panel of the MGI16 have the functions below:

Table 2.41 Ports and LEDs of the MGI16

Ports, LEDs Functions

LAN Port that connects the Ethernet.

SIO UART port (for tests).

RST Button for resetting the MGI16.

PWR LED This LED indicates the power supply status.

- Off: Power is not being supplied.

- On: Power is being supplied properly.

RUN LED This LED indicates MGI16 board status.

- Off: Power is not being supplied.

- On: Booting.

- Blink: The RAM program is operating.

LAN Tx LED This LED indicates the status of the Ethernet data transmission.

- Off: Data does not exist.

- On or blink: Data is being transmitted.

LAN Rx LED This LED indicates the reception status of the link and Ethernet data.

- Off: Data does not exist or the link is not connected.

- On or blink: Data is being received.

SVC LED This LED indicates if the service is being offered.

- This LED blinks when the software task can be serviced.

DSP LED This LED indicates if the VoIP DSP is operating.

- This LED blinks when the VoIP DSP operates.

RTPT LED This LED indicates if the voice packets are being forwarded.

- This LED turns on when the voice packets are forwarded.

RTPR LED This LED indicates if the voice packets are being received.

- This LED turns on when the voice packets are received