Specifications

OfficeServ 7200 System Description

Front View of SVMi-20E

The front view configuration of the SBC board, which is the main board of SVMi-20E is as

follows:

Figure 2.41 Front View of the SVMi-20E

The components on the front panel of SVMi-20E is as follows:

Table 2.43 Ports and LEDs of the SVMi-20E

Ports, LEDs

Functions

LAN The LAN interface connector is used for data transmission and database backup.

It is also called as ‘LAN connector’ and mainly used for system file transmission

(backup and restore) SVMi-20E backs up or restores data by using LAN provided

by customer or by connecting to laptop computer or PC connected the relevant

LAN connector.

SIO Used to connect to PC.

RST If pushing this button, SVMi-20E system starts and the call in progress is

disconnected.

VM1 LED When one or more ports are hooked on/off in the first 4 ports (1~4), it blinks.

VM2 LED When one or more ports are hooked on/off in the second 4 ports (5~8), it blinks.

VM3 LED When one or more ports are hooked on/off in the final 4 ports (9~12), it blinks.

HDD LED If accessing to the hard disk driver, LCD blinks.

LAT LED When the LAN port is run, LED is turned on into green color.

LRT LED When transmitting data to LAN, LED is turned on into orange color.

SDN LED This LED displays the system status. When the system driver is loaded, LED is

turned on into red color, and if the loading is terminated, LED is turned into green

color.

PGD LED If the system power is normal, LED is turned on into green color.

LAN SIO

VM1 VM2 VM3 HDD

LAT LRT SDN PGD

SVMi-20E

RST