Specifications

OfficeServ 7200 System Description

2.5 Wireless LAN Equipment

This section describes the wireless LAN BTS and mobile stations that can be connected

with the OfficeServ 7200.

2.5.1 Wireless LAN Access Point (SMT-R2000)

The Wireless Access Point (SMT-R2000) of 2.4 GHz consists of both wire and wireless

processing parts. The wireless processing part has an IEEE 802.11a/b/g standard and

wireless LAN RF interface with the wireless frequency band of 2.4 GHz and IEEE 802.11a

standard and wireless LAN RF interface with the wireless frequency band of 5 GHz.

Figure 2.43 SMT- R2000

The wire Ethernet interface is connected with the LAN based on 10/100 BASE-T and

transmits/receives data (e.g., Internet access) other than voice. The wireless processing part

transmits/receives voice data for wireless voice calls and accesses the wireless Internet.

2.5.2 Mobile Station

The SMT-W5100, which is a local wireless mobile station, uses the wireless LAN of

IEEE802.11a/b/g to allow the users to make voice calls. The SMT-W5100 supports hand-

over when moving between the APs (SMT-R2000) and can use data terminals such as

laptops that enable the wireless LAN in the same place. The SMT-W5100 performs the

message service functions supported by the OfficeServ 7200 as well.

Figure 2.44 SMT-W5100