User`s manual

31
DDF7001 Processor Connections
The Ethernet software in the DDF7001 ships with a DHCP client enabled, so if connected to a
network that supports DHCP, the DDF7001 will obtain an IP address from the DHCP server.
Once it has done this it begins broadcasting its IP address on the network as a UDP broadcast
message on port 9007.
This message is broadcast once every 2 seconds.
A Windows based program, Doppler DF Discover, is provided with the DDF7001 unit and will
display the IP address, the port number and the MAC address of the device as shown below.
Note the IP address because it is used to connect the browser and the Telnet interface to the
DDF7001. The latitude and longitude fields will be filled in if a GPS is connected to the
direction finder.
Figure 28: Doppler DF Discover will display all direction finders connected on a LAN