User`s manual

39
Chapter 8
Interfacing to the DDF7001 Direction Finder
This chapter is provided for the user that wants to develop their own software to interface
with the DDF7001 direction finder. It describes the command and response interface and the
audio streaming interface.
The RJ45 connector on the DDF7001 provides the Ethernet interface to the DDF7001
direction finder.
IN THIS CHAPTER
Using the Binary Serial Interface .................................................................. 39
Audio Interface ................................................................................................... 51
USING THE BINARY SERIAL INTERFACE
The binary serial interface is a telnet like interface that uses a TCP/IP connection to control
and extract data from the DDF7001 direction finder. When shipped the default static IP
address is 10.0.0.100 and the default IP port is 2101. Both the static IP address and the IP
port can be changed using either the web server or the binary serial interface. The MPT UI
software furnished with the DDF7001 utilizes binary serial interface.
Chapter
8
INTERFACING TO THE DDF7001 DIRECTION
FINDER