Cut Sheet

ManualsBrandsEaton B-Line ManualsBoxes & EnclosuresSC Surface Cover 10x10

Type 1 Screw Cover Enclosures - Painted & Galvanized

Data Sheet

Construction

• Enclosure and cover are fabricated from code gauge steel

or galvanized steel, (see table)

• Enclosure body has mounting holes on the back

• Enclosures are available with or without knockouts on the

sides, top and bottom ends

• Cover is secured to the body with plated hex head combo

screws

• Keyhole slots provided in the cover allow easy access to the

inside without removing the screws

• #10-32 tapped hole provision for optional ground lug kit

Finish

• Wash and phosphate undercoat or galvanized steel

• ANSI 61 gray acrylic electrocoat finish

Standards

• UL 50 listed, Type 1

• CSA C22.2 No. 40 certified, Type 1

• Conforms to NEMA standard for Type 1

• IEC 60529, IP30

Accessories

• Ground lug kit

• Touch-up paint

• See Accessories section

knockout area

(see table for pattern,

see detail for size)

knockout area

(see table for pattern,

see detail for size)

∅ .25

(6)

mounting

hole (4PL)

B (**B)

B-1.00

(25)

A (**A)

A-1.00

(25)

Dimensions:

**A = (-1.90) if 16 or 14 gauge

(-3.90) if 12 gauge

**B = (-2.00) if 16 or 14 gauge

(-4.00) if 12 gauge

Application

• Used as wiring boxes, junction and pull boxes

• Protects against contact with enclosed equipment

Type 1 Enclosures

Notes: Cooper B-Line can provide special sizes, finishes and other modifications. Consult the factory for your special requirements.

Type 1 Enclosures

Summary of content (4 pages)

PAGE 1
Type 1 Enclosures Type 1 Screw Cover Enclosures - Painted & Galvanized Type 1 Enclosures Data Sheet Construction • Enclosure and cover are fabricated from code gauge steel or galvanized steel, (see table) • Enclosure body has mounting holes on the back • Enclosures are available with or without knockouts on the sides, top and bottom ends • Cover is secured to the body with plated hex head combo screws • Keyhole slots provided in the cover allow easy access to the inside without removing the screws • #10-
PAGE 2
Type 1 Enclosures Type 1 Screw Cover Enclosures - Painted & Galvanized Catalog Number Painted Enclosure Size Galvanized Knockout Pattern Knockout Pattern Top & Bottom Height x Width x Depth AxBxC KO No KO in. 663 SC 663 SC NK 663 SCGV mm Gauge Each Side 663 SCGV NK 6.00x6.00x3.00 152x152x76 16 C D E 444 SC 444 SC NK C D E 444 SCGV 444 SCGV NK 4.00x4.00x4.00 102x102x102 16 C D 644 SC C D 644 SC NK 644 SCGV 644 SCGV NK 6.00x4.00x4.
PAGE 3
Type 1 Enclosures Type 1 Screw Cover Enclosures - Painted & Galvanized Type 1 Enclosures Catalog Number Enclosure Catalog Number Painted Galvanized Enclosure Size Height x Width x Depth Knockout Pattern Knockout Pattern Gauge Each Side Top & Bottom C D E AxBxC KO No KO KO No KO in. mm 666 SC 666 SC NK 666 SCGV 666 SCGV NK 6.00x6.00x6.00 152x152x152 16 C D E 866 SC 866 SC NK 866 SCGV 866 SCGV NK 8.00x6.00x6.
PAGE 4
Type 1 Enclosures Type 1 Screw Cover Enclosures - Painted & Galvanized Catalog Number Enclosure Catalog Number Galvanized Knockout Pattern Height x Width x Depth Knockout Pattern Type 1 Enclosures Painted Enclosure Size AxBxC KO KO No KO in. mm Gauge 121210 SC 121210 SC NK 121210 SCGV 121210 SCGV NK 12.00x12.00x10.00 305x305x254 16 D E F G H 181210 SC 181210 SC NK 181210 SCGV 181210 SCGV NK 18.00x12.00x10.