Cut Sheet
Type 12 JIC Continuous Hinge Cover Enclosures
Data Sheet
Construction
• Enclosure and cover are fabricated from (16) gauge steel
• All continuous welded seams are finished smooth
• Cover is secured to the body with a continuous hinge on one
side and easy-to-operate screw clamps mounted to the
opposite side
• Cover has a fixed, oil-resistant gasket
• Ground stud provided on cover
• #10-32 weldnuts are provided for mounting optional panel on
6H x 4W and larger enclosures
• External mounting feet are provided for secure wall mounting
Finish
• Wash and phosphate undercoat
• ANSI 61 gray polyester powder finish
• Hardware and clamps are zinc plated with a yellow
chromate finish
Accessories
• Panels
• JIC terminal strap kit
• JIC terminal strip kit
• Terminal blocks
• Touch-up paint
• See Accessories section
• #8-32 self tapping screw (10168)
Application
• Houses electrical controls and instruments
• Protects against circulating dust, falling dirt and
dripping noncorrosive liquids
Standards
• UL 508 listed, Type 13 and Type 12
• CSA C22.2 No.94 certified, Type 13 and Type 12
• Conforms to NEMA standard for Type 13
and Type 12
• Conforms to JIC standard EGP-1-1967
• IEC 60529, IP65
Type 12/13 Encl.
Notes: Cooper B-Line can provide special sizes, finishes and other modifications. Consult the factory for your special requirements.
104
Type 12 / 13 Enclosures