Cut Sheet

ManualsBrandsEaton B-Line ManualsBoxes & EnclosuresN3r Tel Cabinet 18x18x6

Type 3R Telephone Termination Cabinets

Data Sheet

Cabinet Cabinet Size Knockout

Height x Width x Depth Pattern

A x B x C

Catalog Number

in. mm Gauge Bottom

664 RTC 6.00x6.00x4.00 152x152x102 18

884 RTC 8.00x8.00x4.00 203x203x102 18

12124 RTC 12.00x12.00x4.00 305x305x102 18

12126 RTC 12.00x12.00x6.00 305x305x152 18

18126 RTC 18.00x12.00x6.00 457x305x152 18

18186 RTC 18.00x18.00x6.00 457x457x152 16

24126 RTC 24.00x12.00x6.00 610x305x152 18

24186 RTC 24.00x18.00x6.00 610x457x152 16

24246 RTC 24.00x24.00x6.00 610x610x152 14

30246 RTC 30.00x24.00x6.00 762x610x152 14

36246 RTC 36.00x24.00x6.00 914x610x152 14

12128 RTC 12.00x12.00x8.00 305x305x203 18

18188 RTC 18.00x18.00x8.00 457x457x203 16

24248 RTC 24.00x24.00x8.00 610x610x203 14

Construction

• Cabinet and door are fabricated from code gauge galvaneal

steel, (see table)

• Cabinet body has embossed mounting holes on the back

• Knockouts are standard on bottom end

• Door is secured to the body with heavy-duty hinges on one

side and a T-handle lock with key on the opposite side

Standards

• UL 1863 listed, Type 3R

• Conforms to NEMA standard for Type 3R

• IEC 60529, IP32

Finish

• Wash and phosphate undercoat

• ANSI 61 gray acrylic electrocoat finish

Accessories

• Locks

• Terminal blocks

• Wood back boards, barriers and shelves

• Touch-up paint

• See Accessories section

Application

• Used as telephone and communication cable

termination and spare fuse cabinets

• Protects against falling rain, sleet and external

ice formation

Type 3/3R Enclosures

DEF

HI J

CDE

CDEF

HI J

CDEF

HI J

CDEF

HI J

CDEF

HI J

CDEF

HI J

CDEF

HI J

CDEF

HI J

Notes: Cooper B-Line can provide special sizes, finishes and other modifications. Consult the factory for your special requirements.

Type 3 / 3R Enclosures

Summary of content (6 pages)

PAGE 1
Type 3 / 3R Enclosures Type 3R Telephone Termination Cabinets Data Sheet Construction Type 3/3R Enclosures • Cabinet and door are fabricated from code gauge galvaneal steel, (see table) • Cabinet body has embossed mounting holes on the back • Knockouts are standard on bottom end • Door is secured to the body with heavy-duty hinges on one side and a T-handle lock with key on the opposite side Standards • UL 1863 listed, Type 3R • Conforms to NEMA standard for Type 3R • IEC 60529, IP32 Finish • Wash and
PAGE 2
Type 3 / 3R Enclosures Type 3R Telephone Termination Cabinets Illustration Sheet B B-3.00 C (76) Type 3/3R Enclosures A-1.00 A (25) A-3.00 (76) T-handle lock B-1.00 (25) ∅ .25 (6) mounting hole (4PL) knockout area (see table for pattern, see detail for size) 1.62” 1.62” (41) 1.62” (41) 1.62” 1.87” 1.87” (47) (47) (41) 1.62” (41) 1.62” (41) 1.62” (41) 1.
PAGE 3
Type 3 / 3R Enclosures Type 3R Telephone Termination Cabinets Data Sheet Construction Type 3/3R Enclosures • Cabinet and door are fabricated from code gauge galvaneal steel, (see table) • Cabinet body has embossed mounting holes on the back • Knockouts on bottom end are standard on cabinets 24 inches wide or smaller • Door is secured to the body with heavy-duty hinges on one side and a T-handle lock with key on the opposite side • .
PAGE 4
Type 3 / 3R Enclosures Type 3R Telephone Termination Cabinets Illustration Sheet B C B-3.00 (76) Type 3/3R Enclosures A A-1.00 A-3.00 (25) (76) T-handle lock B-1.00 plywood back board (25) ∅ .25 (6) mounting hole (4PL) ground circuit bar knockout area (see table for pattern, see detail for size) 1.62” 1.62” (41) 1.62” (41) 1.62” 1.87” 1.87” (47) (47) (41) 1.62” (41) 1.62” (41) 1.62” (41) 1.
PAGE 5
Type 3 / 3R Enclosures Type 3R Telephone Termination Cabinets Data Sheet Construction Type 3/3R Enclosures • Cabinet and door are fabricated from 14 gauge galvaneal steel • Knockouts are furnished on the bottom end for access into the cable splicing compartment, (refer to drawing) • Door is held rigid with stiffeners • Door is secured to the body with a continuous hinge and stainless steel pin on one side and a hex head flush latch on the opposite side • Fixed barrier with access knockouts and separate co
PAGE 6
Type 3 / 3R Enclosures Type 3R Telephone Termination Cabinets Illustration Sheet B Type 3/3R Enclosures splice bar A hex head flush latch door stiffener splice compartment plywood back board continuous hinge C 2.00 KO (actual punch size is 2.50) 3.50 (89) 7.00 (178) Cabinet Bottom (door removed) Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.