Cut Sheet

Lay-In Wireway
Type 1 Screw Cover - Painted & Galvanized
Illustration Sheet and Catalog Number Subclass: Painted - AK1 & Galvanized - Z40
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Cable & Wire Management
Telescopic Fitting
Catalog Number A B1 B2 C
Painted Galvanized in. mm in. mm in. mm in. mm
22 FTF 22 FTFGV 2.75 70 1.75 44 1.12 28 12.00 305
33 FTF
-- 3.25 83 2.25 57 1.12 28 12.00 305
44 FTF 44 FTFGV 4.25 108 3.25 83 1.12 28 12.00 305
64 FTF
-- 6.25 159 3.25 83 1.12 28 12.00 305
66 FTF 66 FTFGV 6.25 159 5.25 133 1.12 28 12.00 305
88 FTF 88 FTFGV 8.25 210 7.25 184 1.12 28 12.00 305
1010 FTF 1010 FTFGV 10.25 260 9.25 235 1.12 28 12.00 305
1212 FTF 1212 FTFGV 12.25 311 11.25 286 1.12 28 12.00 305
End
Catalog Number AB
Painted Galvanized
KO No KO KO No KO in. mm in. mm
22 E 22 E NK 22 EGV 22 EGV NK 2.50 64 2.50 64
33 E 33 E NK -- -- 3.00 76 3.00 76
44 E 44 E NK 44 EGV 44 EGV NK 4.00 102 4.00 102
64 E 64 E NK -- -- 6.00 152 4.00 102
66 E 66 E NK 66 EGV 66 EGV NK 6.00 152 6.00 152
88 E 88 E NK 88 EGV 88 EGV NK 8.00 203 8.00 203
1010 E 1010 E NK 1010 EGV 1010 EGV NK 10.00 254 10.00 254
1212 E 1212 E NK 1212 EGV 1212 EGV NK 12.00 305 12.00 305
See drawing for KO sizes.
End
Used to terminate wireway or fitting.
2.50” x 2.50” (64 mm x 64 mm)
through 8.00” x 8.00” (203 mm x
203 mm) ends have a 1.50”-1.25”
concentric 2-way KO. 10.00” x
10.00” (254 mm x 254 mm) ends
and larger have a 3.00” - 2.50”
concentric 2-way KO for terminating
on pipe or conduit. Also available
without KO.
B
A
Telescopic Fitting
Adjustable length up to
10.00” (254 mm). Wraps
around the two near
joining wireway lengths to
achieve a continuous run.
C
A
B1
B2
Connector
Catalog Number
AB
Galvanized in. mm in. mm
22 C 2.50 64 2.50 64
33 C 3.00 76 3.00 76
44 C 4.00 102 4.00 102
64 C 6.00 152 4.00 102
66 C 6.00 152 6.00 152
88 C 8.00 203 8.00 203
1010 C 10.00 254 10.00 254
1212 C 12.00 305 12.00 305
Connector
Swing gate allows
for lay-in of wire
and cable.
B
A
Wireway End Flange
Catalog Number
A B E F
Painted Galvanized
in. mm in. mm in. mm in. mm
22 GF 22 GFGV 2.50 64 2.50 64 4.00 102 4.00 102
33 GF
--
3.00 76 3.00 76 4.50 114 4.50 114
44 GF 44 GFGV 4.00 102 4.00 102 5.50 140 5.50 140
64 GF
--
6.00 152 4.00 102 7.50 191 5.50 140
66 GF 66 GFGV 6.00 152 6.00 152 7.50 191 7.50 191
88 GF 88 GFGV 8.00 203 8.00 203 9.50 241 9.50 241
1010 GF 1010 GFGV 10.00 254 10.00 254 11.50 292 11.50 292
1212 GF 1212 GFGV 12.00 305 12.00 305 13.50 343 13.50 343
Wireway End Flange
Allows for a secure
connection of wireway
to an adjoining
enclosure or wall.
F
E
B
A
11
Cable & Wire Management
B-Line series electrical enclosures Eaton