Cut Sheet

ManualsBrandsEaton B-Line ManualsClosure PlatesWireway Closure Plate, 3" x 3", Type 1, Gray, No KOs

Type 1 Screw Cover Wireway - Painted & Galvanized

Data Sheet

Construction

• Wireway body and cover are fabricated from code gauge steel

or galvanized steel, (see table)

• Wireway body has mounting holes on the back

• Wireway is available with or without knockouts on the top and

bottom sides

• Wireway fittings have no knockouts, ends are available with or

without knockouts

• Cover is secured to the body with plated screws

• Keyhole slots are furnished on the wireway cover which allow

easy access to the inside without removing the screws

• Flush and surface wireway covers are available

• Wireway exceeding 72 inches in length has two overlapping

covers

• Variety of fittings allow runs which can change direction,

junction and terminate

• Standard wireway connectors (sold separately) have a unique

gate feature which can swing completely open allowing for

continuous runs of wire and cable

• Universal connectors are also available for adapting to other

manufacturer’s wireway, (see table, page 16)

• Completely interchangeable with Type 1 Hinge Cover Wireway

and Fittings

Application

• Houses runs of control and power cable

• Used for cable and wire junction, distribution and

termination

Standards

• UL 870 listed, Type 1

• CSA C22.2 No. 26 certified, Type 1

• Conforms to NEMA standard for Type 1

• IEC 60529, IP30

Finish

• Wash and phosphate undercoat or galvanized steel

• ANSI 61 gray acrylic electrocoat finish

Accessories

• Sealing devices

• Touch-up paint

• See Accessories section

Notes: Cooper B-Line can provide special sizes, finishes and other modifications. Consult the factory for your special requirements.

Wireway

Summary of content (8 pages)

PAGE 1
Wireway Wireway Type 1 Screw Cover Wireway - Painted & Galvanized Data Sheet Application Construction • Houses runs of control and power cable • Used for cable and wire junction, distribution and termination • Wireway body and cover are fabricated from code gauge steel or galvanized steel, (see table) • Wireway body has mounting holes on the back • Wireway is available with or without knockouts on the top and bottom sides • Wireway fittings have no knockouts, ends are available with or without knockout
PAGE 2
Wireway Catalog Number Wireway Catalog Number Painted Wireway Size Galvanized Knockout Quantity Height x Depth x Length D A xBxC KO No KO KO 2212 G 2212 G NK 2212 GGV 2218 G 2218 G NK 2224 G No KO Gauge in. mm Top Bottom in. mm 2212 GGV NK 2.50x2.50x12.00 64x64x305 1.25 32 16 3 3 2218 GGV 2218 GGV NK 2.50x2.50x18.00 64x64x457 1.25 32 16 5 5 2224 G NK 2224 GGV 2224 GGV NK 2.50x2.50x24.00 64x64x610 1.25 32 16 7 7 2236 G 2236 G NK 2236 GGV 2236 GGV NK 2.50x2.
PAGE 3
Wireway Wireway Type 1 Screw Cover Wireway - Painted & Galvanized Catalog Number Wireway Catalog Number Painted Wireway Size Galvanized Knockout Quantity Height x Depth x Length D A xBxC in. mm Gauge Top Bottom 203x203x305 6.00 152 14 3 3 8.00x8.00x18.00 203x203x457 6.00 152 14 5 5 8824 GGV NK 8.00x8.00x24.00 203x203x610 6.00 152 14 7 7 8836 GGV 8836 GGV NK 8.00x8.00x36.00 203x203x914 6.00 152 14 11 11 8848 G NK 8848 GGV 8848 GGV NK 8.00x8.00x48.
PAGE 4
Wireway Catalog Number Connector Catalog Number A in. 22 C Telescopic Fitting B mm in. mm 2.50 64 2.50 64 33 C 3.00 76 44 C 4.00 102 4.00 102 64 C 6.00 152 4.00 102 66 C 6.00 152 6.00 152 88 C 8.00 203 8.00 203 Catalog Number 3.00 76 1010 C 10.00 254 10.00 254 1212 C 12.00 305 12.00 305 Reducer Catalog Number Painted A1 B1 A2 B2 A Painted Galvanized 22 FTF B1 B2 C in. mm in. mm in. mm in. mm 22 FTFGV 2.75 70 1.75 44 1.12 28 12.00 305 33 FTF 33 FTFGV 3.
PAGE 5
Wireway Wireway Type 1 Screw Cover Wireway Fittings - Painted & Galvanized Catalog Number 45° Elbow Catalog Number Painted A Cross B E Catalog Number F Painted Galvanized in. mm in. mm in. mm in. mm 2245 L COMBO 2245 L COMBOGV 2.50 64 2.50 64 1.72 44 1.72 44 22 X 3345 L COMBO 3345 L COMBOGV 3.00 76 3.00 76 2.56 65 2.56 65 4445 L COMBO 4445 L COMBOGV 4.00 102 4.00 102 2.75 70 2.75 70 6445 L COMBO 6445 L COMBOGV 4.00 102 6.00 153 2.75 70 2.
PAGE 6
Wireway Illustration Sheet .75 (19) E E E F F F Tee 90˚ Elbow E .75 E F F (19) F A1 A2 Cross C Reducer Fitting 45˚ Elbow C C-4.00 (102) A D Wireway Front cover screw mounting hole 1.25 B (32) J 1.56 J H H J (40) 3.00 3.00 (76) (76) (76) typ. spacing typ. spacing Knockout sizes: H = 3/4” or 1/2” conduit J = 11/4” or 1” conduit 3.00 Wireway Side Note: 2.50” x 2.50” wireway has 1/2” and 3/4” 2-way knockouts H only, 3” (76 mm) from ends and 3” (76 mm) on center.
PAGE 7
Wireway Wireway Type 1 Screw Cover Wireway - Painted & Galvanized Illustration Sheet Wireway Hangers ∅ .45 C ∅ .25 K K A G G B J (shipped unassembled)* H Wireway Section Side Cover Assembly Top Cover Assembly Lengths from 12.00” (305 mm) to 120.00” (3048 mm). Wireway exceeding 72.00” (1829 mm) has two covers. Shown with KO’s also available without. For those installations where the wireway cover must be removed from the side.
PAGE 8
Wireway Illustration Sheet Wireway 90˚ Elbows C C C C B B A B A A Combo Opening Side Opening Specially designed for removing either the inside or outside cover to allow a continuous run with 90˚ turns. Side cover is removable to allow a continuous run on designs with 90˚ turns. Sweep Elbow Side cover design with a larger radius for 90° sweeping turns. Wireway 45˚ Elbows B B A A Combo Opening Side Opening Similar to the 90˚ elbow design except a 45˚ turn.