Cut Sheet

Connector
Swing gate allows
for continuous runs
of wire and cable.
B
A
Barrier, Bolt-On
For those installations
that require separated
wiring compartments.
End
Used to terminate wireway or fitting.
2.50”x2.50” (64 mm x 64 mm) through
8.00”x8.00” (203 mm x 203 mm) ends
have a 1.50”-1.25” concentric 2-way KO.
10.00” x 10.00” (254 mm x 254 mm) ends
and larger have a 3.00”-2.50”
concentric 2-way KO for terminating on
pipe or conduit. Also available without
KO.
B
A
Wireway End Flange
Allows for a secure connection
of wireway to an adjoining
enclosure or wall.
F
E
B
A
Telescopic Fitting
Adjustable length up to 10.00”
(254 mm). Wraps around the two
near joining wireway lengths to
achieve a continuous run.
C
A
B1
B2
Reducer
A2 and B2 dimensions (see catalog
table), correspond to the large end
opening. Used to reduce or enlarge
wireway runs.
C
A1
B1
Top Cover Assembly
For those installations where the
wireway cover must be removed
from the top.*1010 FH & 1212 FH
are shipped welded in the top
cover assembly position.
Wireway Hangers
(shipped
unassembled)*
J
K
G
K
G
∅ .25
∅ .45
H
Side Cover Assembly
For those installations where the
wireway cover must be removed
from the side. *1010 FH &
1212 FH are shipped welded in
the top cover assembly position.
Wireway Section
Lengths from 12.00” (305 mm) to
120.00” (3048 mm). Wireway
exceeding 72.00” (1829 mm) has
two covers. Shown with KO’s
also available without.
B
A
C
Type 1 Screw Cover Wireway - Painted & Galvanized
Illustration Sheet
60.00
(1524)
H
.
875
(22)
.875
(22)
18
Wireway
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Wireway