Cut Sheet

Type 1 Screw Cover Wireway - Painted & Galvanized
Illustration Sheet
90° Elbow-Tee-Cross
Designed for left or right 90°
turns or as a tee or cross by
removing closure plates.
Includes two (2) closure
plates and hardware.
Wireway 90˚ Elbows
Wireway 45˚ Elbows
Sweep Elbow
Side cover design with a larger
radius for 90° sweeping turns.
Cross
Side cover and broad body
design to junction cable run
in four directions.
A
B
Tee
Side cover design where a “T”
junction is necessary.
A
B
Side Opening
Similar to the 90˚ side opening
design except for a 45˚ turn.
Excellent for combining two to
make a gradual sweeping 90˚
turn.
A
B
Combo Opening
Similar to the 90˚ elbow
design except a 45˚ turn.
Both inside and outside
covers removable.
A
B
A
B
Side Opening
Side cover is removable to allow
a continuous run on designs
with 90˚ turns.
A
C
C
B
Combo Opening
Specially designed for removing
either the inside or outside
cover to allow a continuous run
with 90˚ turns.
B
A
C
C
C
C
A
B
Wireway
19
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Wireway