Cut Sheet

ManualsBrandsEaton B-Line ManualsBoxes & Enclosures1.50 SS OIL-TIGHT HOLE SEAL

Electrical Enclosures

Accessories

431

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

Accessories

Baffle Plates

Hole Seals

Baffle Plates

Baffle Plate Used with

Louver Plate

ABC

Catalog Number in. mm in. mm in. mm Catalog Number

BP23 3.25 83 3.25 83 2.50 64 LKP23

BP33 3.87 98 4.50 114 3.75 95 LPK33

BP34 4.75 121 4.50 114 3.75 95 LPK34

BP43 4.50 114 5.50 140 4.75 121 LPK43

BP44 5.62 143 5.50 140 4.75 121 LPK44

BP64 5.12 130 7.50 191 6.75 171 LPK64

BP66 7.37 187 7.50 191 6.75 171 LPK66

BP84 5.31 135 9.50 241 8.75 222 LPK84

BP86 7.68 195 9.50 241 8.75 222 LPK86

BP88 10.06 256 9.50 241 8.75 222 LPK88

BP812 14.81 376 9.50 241 8.75 222 LPK812

.50

(13)

Baffle Plates are intended to be used with Louver Plates when it is necessary

to prevent direct access into the enclosure through the louver opening. The

plate is designed to mount to the inside of the enclosure using the same

cut-out and mounting holes required to mount the Louver Plate Kit. Plates

are (16) gauge steel and have an ANSI 61 gray polyester powder finish.

UL Listed.

.21 D hole

(5)

Bolt-On Accessories

Illustration Sheet and Catalog Number Discount Schedule: C2

Subclass: DS0

Protects knockout openings and extra pushbutton or conduit openings from dirt, oil, dust and water.

Each hole seal has oil-resistant gasketing and plated stud and wing nut. Available in steel finished

with ANSI 61 polyester powder or unpainted stainless steel.

Oil-Tight Hole Seals

Catalog Number Application Max. Hole Hole Seal

Diameter Diameter

Steel Stainless

in. mm in. mm

SPBG SPBGSS Miniature oil-tight pushbutton holes 0.88 22 1.22 31

SPB SPBSS Standard oil-tight pushbutton holes 1.25 32 1.75 44

S050 S050SS 1/2-inch conduit holes .88 22 1.38 35

S075 S075SS 3/4-inch conduit holes 1.06 27 1.56 40

S100 S100SS 1-inch conduit holes 1.38 35 1.88 48

S125 S125SS 1 1/4-inch conduit holes 1.69 43 2.19 56

S150 S150SS 1 1/2-inch conduit holes 2.00 51 2.50 64

S200 S200SS 2-inch conduit holes 2.50 64 3.00 76

S250 S250SS 2 1/2-inch conduit holes 3.00 76 3.50 89

S300 S300SS 3-inch conduit holes 3.62 92 4.12 105

S350 S350SS 3 1/2-inch conduit hole 4.12 105 4.62 117

S400 S400SS 4-inch conduit holes 4.62 117 5.12 130

Painted Steel - U.L. listed as Type 3R,

12, 13, & 4

Stainless Steel - U.L. listed as Type 4X