Cut Sheet

0813 BU-SB13XXX Page 1 of 3 Data Sheet # 1023
Low-Peak™ Class CC
LP-CC — 600Vac/300Vdc,
1
⁄2-30A Time-Delay Fuses
Description: Ultimate protection Class CC current-limiting,
time-delay fuses. Time-delay – 12 seconds (minimum) at
200% of rated current.
Catalog Symbol: LP-CC-(amp)
Ratings:
Volts — 600Vac,
— 300Vdc (
1
⁄2-2
8
⁄10A, 20-30A)
— 150Vdc (3-15A)
Amps —
1
⁄2-30A
IR — 200kA Vac RMS Sym.
— 20kA Vdc
Agency Information:
CE, Std. 248-4, Class CC, UL Listed, Guide JDDZ, File E4273
CSA Certified; Class 1422-02, File 53787
Catalog Numbers (amps)
LP-CC-
1
⁄2 LP-CC-1
1
⁄2 LP-CC-3 LP-CC-6 LP-CC-12
LP-CC-
6
⁄10 LP-CC-1
6
⁄10 LP-CC-3
2
⁄10 LP-CC-6
1
⁄4 LP-CC-15
LP-CC-
8
⁄10 LP-CC-1
8
⁄10 LP-CC-3
1
⁄2 LP-CC-7 LP-CC-20
LP-CC-1 LP-CC-2 LP-CC-4 LP-CC-7
1
⁄2 LP-CC-25
LP-CC-1
1
⁄8 LP-CC-2
1
⁄4 LP-CC-4
1
⁄2 LP-CC-8 LP-CC-30
LP-CC-1
1
⁄4 LP-CC-2
1
⁄2 LP-CC-5 LP-CC-9
LP-CC-1
4
⁄10 LP-CC-2
8
⁄10 LP-CC-5
6
⁄10 LP-CC-10
Carton Quantity:
Amp Rating Carton Qty.
0-30 10
Features:
• 200kA interrupting rating complies with NEC
®
Section 110.9
f
or today's large capacity systems.
• Fast short-circuit protection and dual-element, time-delay
performance provide ultimate protection.
• Reduces existing fuse inventory by up to 33% when
upgrading to Low-Peak fuses.
• Consistent 2:1 ampacity ratios for all Low-Peak fuses make
selective coordination easy.
• Time-delay characteristic avoids unwanted fuse openings
from surge currents while fast response speed under short-
circuit conditions provides a high degree of current
limitation.
• Current-limitation protects downstream components against
damaging thermal and magnetic effects of short-circuit
currents.
• A superior, all-purpose, space-saving branch circuit fuse
that meets most protection requirements up to 30A.
• Very compact, with a physical size only
13
⁄32" x 1
1
⁄2"
(10.3 x 38.1mm) with rejction tip.
• Proper sizing can provide "no damage" Type 2 coordinated
protection for NEMA and IEC motor controllers.
• Can be used where either a time-delay or a fast-acting fuse
is needed, making selection easier and reducing spare fuse
inventories for substantial cost reduction.
• Superior protection for small horsepower motor circuits.
Recommended Fuse Blocks and Holders
Fuse Amps 1-Pole 2-Pole 3-Pole
Open Blocks
0-30 BC6031_ BC6032_ BC6033_
DIN-Rail Holders
CHCC1D_ CHCC2D_ CHCC3D_
0-30
——OPM-NG-_
——OPM-1038_
——OPM-1038_SW
Panel Mount Holders
0-30
HPS ——
HPF ——
In-Line Holders
0-30
— HEX —
HEZ ——
For additional information on the Class CC fuse blocks and
holders, see data sheets:
• Open Blocks # 1105 (BC Series)
• DIN-Rail Holders # 3185 (CHCC), # 1109 (OPM),
# 1102 (OPM-1038), 1103 (OPM-1038_SW),
• Panel Mount Holders # 2113 (HPS), # 2114 (HPF)
• In-Line Holders # 2126 (HEX), # 2130 (HEZ)
1
.5" (± 0.031)
(
38.1mm)
0.41" (± 0.005)
(
10.3mm)
D
imensions - in (mm)