Network Card User Manual

CONFIGURING THE CARD

EATON Power Xpert

Gateway Series 1000 Card User’s Guide S 164201670 Rev 1

Configuring Auto Discovery Settings

Configure the Auto Discovery settings so that the Power Xpert Software

can find the PXGX Series 1000 Card on the network automatically. The

card sends multicast discovery messages to any control Power Xpert

host monitoring the specified Listen port.

To configure the auto discovery settings:

1. From the card’s Web page, click the Auto Discovery link from the

menu bar.

2. The default Listen port is 1900. To modify, enter a value between

10000 and 65535.

3. The default Announce period is 600 seconds. To modify, enter a

value between 60 and 1800 seconds.

4. The default Announce TTL is 4 hops. To modify, enter a value

between 1 and 254.