- Eaton UPS User's Guide

MAINTENANCE

Eaton 9170

UPS (3–18 kVA) User's Guide S 164201393 Rev E www.eaton.com/powerquality

3. Use two hands to support the module. When fully extended, lower

the front down slightly and lift the rear edge over the safety stop on

the center support rail.

4. Treat the original and replacement modules with care to avoid

damaging connectors or internal circuitry. Label the original module

with masking tape or some other identifier. Record the serial

number of the replacement module for your warranty.

5. Insert the replacement module by sliding it carefully into the

cabinet. Lower the front down slightly and lift the rear edge over

the safety stop on the center support rail. Keep the module handle

extended until the module is fully inserted.

6. Raise the power module handle to secure the module into the

cabinet. Be sure the handle latch snaps into place. Tighten the

thumbscrew on the handle.

7. Replace the front cover.