- Eaton UPS User's Guide

UPS WITH BYPASS ELECTRICAL INSTALLATION

Eaton 9170

UPS (3–18 kVA) User's Guide S 164201393 Rev E www.eaton.com/powerquality

7. Find the terminal strip inside the bypass switch cabinet. Using the

label on the back of the bypass switch access cover and the proper

installation wiring diagram, make the terminal strip connections and

tighten all connections as specified in Table 2 on page 22. Use

copper wire that is the appropriate size for the current draw.

Figure 16 shows a sample label.

Figure 16. Bypass Switch Wiring Label

8. After installing bypass switch wiring, torque the screws holding all

input and output power conductors to the values specified in

Table 2 on page 22.