Specification Sheet

Portfolio
SPECIFICATION FEATURES
Optical Reflector
.050 thick aluminum, in a one piece
spun parabolic contour. Available
in a variety of Alzak® finishes.
Also available with white or black
baffle. Positive reflector mounting,
without tools, pulls trim tight to
ceiling.
Mechanical Housing
Mounting Frame
One piece precision die cast
aluminum 1-1/2" deep collar
accommodates varying dimensions
of ceiling materials.
Universal Mounting Bracket
Accepts 1/2" EMT, C Channel, T bar
fasteners, and bar hangers. Adjusts
5" vertically from above or below
ceiling.
Conduit Fittings
Die cast screw tight connectors.
Junction Box
Listed for eight #12AWG (four in,
four out) 90°C conductors feed
through branch wiring. 1/2" and
two 3/4" pry outs. Positioned to
allow straight conduit runs. Access
to junction box by removing
reflector.
Trim Ring Options
Self flanged or molded white trim
ring. Rimless trim ring accessory
available.
Socket Connector
One piece die cast aluminum
connection allows venting for
maximum thermal performance.
Rotary Lock Socket
4-pin GX24q3/4 fatigue free
stainless steel lamp spring ensures
positive lamp retention.
Electronic Ballast with
Quick Disconnect
Electronic ballast provides full
light output and rated lamp life.
Provides flicker free and noise free
operation and starting. End of lamp
life protection is standard.
Labels
cULus listed, standard damp label.
Electronic ballast housings include
peel down wattage label from 42W
down to 26W allowing de-rating to
meet max wattage requirements.
Meets IECC, ASHRAE,and Title 24
commercial standards.
CD6113
CD6118
CD6126
CD6142
6CH142
13W, 18W or 26W DTT
26W, 32W, 42W TTT or PLT
Compact Fluorescent
STEPREPEAT>
6-Inch Horizontal Downlight
High efficiency, low brightness 6-inch aperture wide beam reflector
for use with compact fluorescent lamps. The precisely formed non-
imaging optical reflector ensures 55° cutoff to lamp and lamp image
and the one piece design eliminates light leaks at the ceiling. Standard
features include low iridescent finish on all reflector colors and venting to
ensure maximum lamp life and lumen output. Optics offer unparalleled
performance in glare free lighting with a smooth beam devoid of hot
spots. Wide beam and medium beam downlight, lens, and open wall
wash reflectors are interchangeable within the same housing.
DESCRIPTION
6-3/8" [162mm]
Ø 7-1/4" [184mm]
Ø 7-3/4" [197mm]
6-23/32"
[170mm]
13-29/32"
[353mm]
17-23/32" [450mm]
11-23/32"
[298mm]
13-25/32" [350mm]
To p View
(with EM option)
Catalog #
Type
Date
Project
Comments
Prepared by
ENERGY DATA
13W DTT
Ballast: Electronic
120V Input Watts: 16 Line Amps: 0.13
277V Input Watts: 16 Line Amps: 0.05
18W DTT
Ballast: Electronic
120V Input Watts: 19 Line Amps: 0.15
277V Input Watts: 19 Line Amps: 0.07
26W TTT
Ballast: Electronic
120V Input Watts: 27 Line Amps: 0.23
277V Input Watts: 29 Line Amps: 0.11
32W TTT
Ballast: Electronic
120V Input Watts: 36 Line Amps: 0.31
277V Input Watts: 36 Line Amps: 0.13
42W TTT
Ballast: Electronic
120V Input Watts: 46 Line Amps: 0.38
277V Input Watts: 46 Line Amps: 0.17
Power Factor: >0.99 THD: <10%
Min. Starting Temperature: -18°C (0°F)
Sound Rating: Class A Standards
NOTES: Accessories should be ordered separately. For additional
options, please consult your Cooper Lighting Representative.
Alzak is a registered trademark of Aluminum Company of
America.
ADP121204
2015-09-18 14:25:08