Specification Sheet
HALO
®
Catalog #
Type
Project
Comments
Date
Prepared by
E5ICATNB
5” IC, Air-Tite,
New Construction
Housing, No Bracket
E26 Screw base housing
Dimensions
Specification Features
Description
The Halo E5 series consists of compact and efficient recessed housings
optimized and listed for PAR20 and PAR30, EISA compliant, tungsten-
halogen, CFL and LED lamps as well as incandescent. The Halo E5 housing
is suitable for residential or light commercial applications. For installation in
insulated ceilings* and non-insulated ceilings; with airtight code compliant
construction. Use with a variety of trims and finishes to create different
lighting effects or to match any decor. The E5ICATNB can save installation
time. It is designed without a socket plate for use with socket supporting
trims only. With these trims there is no need to spend time removing the
socket plate and the fixed lamp position of socket supporting trims saves on
lamp adjustment time too. May be retrofit with HALO LED lighting systems.
Housing
•
Single wall die-formed aluminum
housing
•
Housing features a precision rolled
interlocking collar which maintains
aperture geometry for greater
assurance of installation results
•
Integral Air-Tite gasket for code-
required gasket between fixture
and finished ceiling - seals aperture
without need for additional caulk
•
May be removed from the plaster
frame to provide access to junction
box
Plaster Frame
•
Galvanized steel frame. Housing
adjusts in plaster frame to
accommodate up to 3/8” - 1” ceiling
thickness
•
(2) Regressed locking screws for
securing hanger bars
•
Integral Air-Tite gasket seals housing
and meets code-required gasket
between fixture and finished ceiling
Includes:
Bar Hangers
All Nail!™
•
Integral precisely positioned nail for
engineered and natural framing
•
Mini-foot leveling flange
•
Integral T-Grid Clip, no accessory
clips required
q-Channel bars with Pass-N-Thru™
•
Unique inverted “q” interlocking
channel for rigidity and stability
•
Pass-N-Thru™ feature allows bars to
cross-over for tool-less shortening in
tight spaces
Hinged junction box w/
Slide-N-Side™
•
(4) ½” conduit pry-outs
•
(3) Slide-N-Side™ Non-Metallic (NM)
wire traps, allow wiring outside the
box
•
For 14-2, 14-3, 12-2, 12-3 U.S. and
14-2, 14-3, 12-2 Canadian
•
Hinged door for easy access
•
Box is repositionable 90˚ on frame to
avoid obstructions
Quick Connect™
•
(3) Push wire nuts included, for
speed & reliability
•
Clear caps for wire connection
visibility
cULus Listed
•
Compact 16 in
3
volume
•
Listed for max. (10) No. 12 AWG
or (14) No. 14 AWG 90˚ C splice
conductors in box
Air-Tite™ code compliant
•
Certified under ASTM E283
•
Exclusive gasket seals aperture,
frame & ceiling
•
No additional caulk required
Socket
•
Porcelain socket with nickel plated
brass screw shell
•
Snap-in socket speeds installation
and attaches directly to the trim for
consistent lamp positioning
Thermal Protector
•
Self resetting thermal protector
deactivates fixture if overheating
occurs due to improper lamping or
misapplied insulation
Trims
•
Halo Fit-All concept offers
multiple trim options in a variety
of design styles, and functional
beam distributions to control
beam angle and lumen delivery in
accommodating various lamp types
including Halogen, CFL and LED
Compliance
•
cULus Listed 1598 Luminaire
•
cULus Listed Damp Location
•
cULus Listed for Wet Location,
covered ceiling, with select trims
•
cULus Listed for direct contact with
insulation and combustible material*
•
Air-Tite code compliant. Certified
under ASTM E283; not exceeding
2.0 cfm (0.944 L/s) air leakage rate
tested at a 1.57 psf (75 Pa) pressure
differential
•
RoHS compliant
*Not to be used in direct contact with
spray foam insulation (Consult NEMA
LSD57-2013)
FOR USE IN INSULATED
CEILINGS
FOR DIRECT CONTACT
WITH INSULATION*
9-7/8"
[250mm]
6-3/4"
[172mm]
1/2"
[13mm]
6-3/4"
[171mm]
5-3/4"
[146mm]
Ceiling Opening
E5ICATNB
9-7/8"
[250mm]
6-3/4"
[172mm]
1/2"
[13mm]
6-3/4"
[171mm]
5-3/4"
[146mm]
Ceiling Opening
E5ICATNB
TD518057EN
2/09/2016
Special Features
All-Nail!™ bar hangers
q-Channel bars with Pass-N-Thru™
Hinged J-Box with Slide-N-Side™
Quick Connect™ push wire nuts
Air-Tite™ code compliant