Installation Sheet

HALO Home Twin LED Floodlight

Quick Start Guide

Smart Outdoor Security - Flood

1 Install the Smart Outdoor Security Flood in your desired location. (See enclosed instructions sheet.)

1. Light blinks once and then dims down to 5% at 3000K to indicate being unclaimed. It blinks twice on subsequent

power cycles.

Notes:

• Light blinks twice on power up after a factory reset or if it is unclaimed.

• Light blinks once to indicate it has just been claimed. It restores the saved dimming and CCT levels on

subsequent power cycles.

• Light retains state on power cycle for factory reset, unclaimed and ON state.

If light was OFF (using App or schedule), after one power cycle, it restores ON

state prior to OFF. Dimming and CCT will be restored.

Do not use with existing dimmers.

2 Download the HALO Home app to your smart mobile device.

5www.eaton.com/HaloHome

3 Create a user account and validate via email

Note: Skip to Step 4 if you already have the app.

• Enter your email address as your user account name.

• Select a password of at least 8 characters from the mobile

application “register” screen.

4 Adding a ﬂoodlight to the app

1. Press “+” on the HALO Home App screen to add the ﬂoodlight.*

* At least one HALO Home ﬂoodlight (or compatible device) will need to be installed

and powered in order to add it to the HALO Home App device list.

PAGE 1
Quick Start Guide Smart Outdoor Security - Flood HALO Home Twin LED Floodlight 1 Install the Smart Outdoor Security Flood in your desired location. (See enclosed instructions sheet.) 1. Light blinks once and then dims down to 5% at 3000K to indicate being unclaimed. It blinks twice on subsequent power cycles. Notes: • Light blinks twice on power up after a factory reset or if it is unclaimed. • Light blinks once to indicate it has just been claimed.
PAGE 2
HALO Home Quick Start Guide - Smart Outdoor Security Flood 5 Adding a floodlight to the app continued 1. The app will search for your installed lights. 2. Select the light and click “Done” to complete the pairing process. FLOODLIGHT Tap to add 3. The light blinks once to indicate it has been claimed. It restores the saved dimming and CCT levels on subsequent power cycles.