Specification Sheet

TD518002EN
7/31/2015
Catalog #
Project
Comments
Prepared by
Type
Date
HALO
SPECIFICATION FEATURES
DESCRIPTION
Ideal for task, accent, office, cove, and utility, under and above cabinet
lighting display, the Halo Undercabinet low-profile design delivers
maximum energy savings and life with easy installation. The integrated
driver design allows 120V direct to the fixture for easy installation.
Fixtures are available in 9”, 18”, 24”, 36” and 48” lengths, the Halo
system can be configured to fit almost anywhere. Each unit has an
integrated on-off switch. Smooth dimming down to 5% using a standard
dimmer*. Combination of direct wire to the fixture and connector cables
provide for installation flexibility. Minimum Color Rendering Index (CRI)
of 90 in 2700K, 3000K and 4000K color temperatures.
Even Light Distribution
Specialized optical system
consisting of tightly clustered
proximity phosphor LEDs,
advanced optical chamber
coatings and lens materials
resulting in soft illumination
with very high efficiency. These
fixtures are ideal for task lighting
over glossy surfaces with no
distracting shadow patterns.
Wiring Flexibility
Use any combination of three
different wiring methods: Bring
flexible conduit or Romex directly
to either end of any size fixture.
Conduit connector and romex
strain relief hardware is included
with each fixture. Utilize the
available plug in connectors (sold
separately) to link additional
fixtures to the circuit or continue
with flex conduit or romex (See
instructions sheets for more
detail).
Durable Low Profile Housing
Heavy gauge aluminum housing
and color matched end caps with a
3/4” overall height.
Two Fastener Mounting
Each unit is secured directly to the
mounting surface with just two
fasteners keeping installation costs
low. Can be mounted in horizontal
and vertical orientations.
Continuous Runs
Link any combination of fixtures
up to 450 W total load using
available connectors.
Optional Accessories
Optional splice box has a
connection port on each side to
allow for runs in either or both
directions. Includes Romex/
½” conduit connector. Various
connector cable options provide
flexibility of mounting location.
Finish Options
Fixtures and accessories are
available in both White (P) and
Matte Black (MB) finishes.
Electronic Driver
Electronic driver provides full light
output, flicker free and noise free
operation.
Labels
- cULus listed
- Can be used to meet IECC,
ASHRAE commercial and
residential standards
- ENERGY STAR® qualified
- FCC
.72”
[18.23mm]
.40”
[10.06mm]
when installed
Size Description 9 in. Nominal 18 in. Nominal 24 in. Nominal
Length “L” 8.98” [228.1mm] 16.55” [420.4mm] 23.98” [609.1mm]
36 in. Nominal
32.44” [824mm]
48 in. Nominal
47.18” [1,198.4mm]
4.37”
[111.05mm]
L
HU10
Integrated Driver
LED Undercabinet
ENERGY DATA
Power Factor: >0.99
THD: <10%
Color Temperature:
2700K, 3000, 4000K
Color Rendering Index: 90
Nominal Lumens/Ft: 330
HU10P
HU10MB
Qualified and compliant. Refer to ENERGY
STAR
®
Qualified Products List for listings. Can
be used to comply with California Title 24 High
Efficacy requirements. Certified to California Title
20 Appliance Efficiency Database.