Specification Sheet

ManualsBrandsEaton Lighting ManualsPortfolioPortfolio LED New Construction Housing for 6" Trims - 1000 Lumens - Line Voltage Dimming

Portfolio

SPECIFICATION FEATURES

Lower Shielding Reflector

Painted die cast aluminum or spun

aluminum lower reﬂector with

a lensed upper optical chamber

providing superior lumen output

with minimal source brightness.

Spun reﬂectors are offered in all

Portfolio Alzak® ﬁnishes. Available

with non-conductive polymer

trim. Reﬂector is retained with two

torsion springs holding the ﬂange

tight to the ﬁnished ceiling surface.

Plaster Frame / Collar

Die cast aluminum 1-1/2” deep

collar accommodates ceiling

materials up to 2”. Universal

mounting bracket accepts 1/2”

EMT, C channel and bar hangers

and adjusts 5” vertically from

above and below the ceiling.

Junction Box

Listed for (8) #12 AWG (four in,

four out) 90°C conductors and feed

thru branch wiring. (4) 1/2” and (2)

3/4” trade size pry outs positioned

to allow straight conduit runs.

Lever connectors for simple push

in wiring.

Thermal

Aluminum heat sink conducts heat

away from the LED module for

optimal performance and long life.

LED

Chip on board with a multitude

of highly efﬁcient white LED’s,

combined with a high reﬂectance

upper reﬂector and convex

transitional lens produce even

distribution with no pixilation.

Rated for 50,000 hours at 70%

lumen maintenance. Auto

resetting, thermally protected,

LED’s are turned off when safe

operating temperatures are

exceeded. Color variation within

3-step MacAdam ellipses. Quick

disconnect allows for tool-less

replacement of LED engine from

below ceiling. Available in 80, 90

or 97 CRI. D2W™ – dim-to-warm

shifts CCT from 3000K to1850K as

ﬁxture dims mimicking halogen

sources.

Driver

Standard 120-277V 0-10V dimming

driver provides ﬂicker free

dimming from 100% to 1% (offered

up to 4000 lumens). Optional 120V

leading edge, <1% 0-10V, Fifth

Light, DMX or Lutron® Ecosystem.

Driver can be serviced from above

or through the aperture.

Connected Lighting Systems

WaveLinx tilemount daylight

sensor includes control module,

sensor and cable allowing use

with the comprehensive lighting

system.

LumaWatt Pro (powered by

Enlighted) wireless tile mount

sensor and relay accessory enables

wireless control using a tile mount

sensor accessory.

Distributed low voltage power

system combines power, lighting,

and controls with ease of

installation.

Code Compliance

Thermally protected and cULus

listed for wet locations with

covered ceiling. IP66 rated

when used with IP66 gasket kit

accessory. Optional City of Chicago

environmental air (CCEA) marking

for plenum applications. EMI/RFI

emissions per FCC 47CFR Part 18

Class B consumer limits. Non-IC

rated - Insulation must be kept 3”

from top and sides of housing.

IC rated up to 1500 lumens. 5000

lumen and above are marked

spacing and must follow spacing

requirements. RoHS Compliant.

Photometric testing completed in

accordance with IES LM 79 and

TM-30 standards. LED life testing

completed in accordance with LM

80 standards.

Warranty

5-year warranty

LD6B EU6B

6LBW 6LBM

6LBN

1000 - 7000 lumens LED

STEPREPEAT>

Narrow, Medium, or Wide Beam

New Construction

6 inch LED recessed narrow, medium, or wide beam downlight designed

for glare free even illumination. Featuring a two-stage diffused reﬂector

system producing smooth distribution with excellent light control and

low aperture brightness. Lumen packages range from 1000 to 7000 with

color temperatures of 2400K, 2700K, 3000K, 3500K, 4000K, and 5000K.

Available with dim-to-warm technology – similar to halogen at full

power, the 3000K LED warms smoothly as dimmed to 1850K creating a

rich warm glow within the space.

DESCRIPTION

Refer to ENERGY STAR

Qualified

Products List. Can be used to comply

with California Title 24 High Efficacy

requirements.

1000-2000 LUMENS 3000-5000 LUMENS 6000-7000 LUMENS

NARROW

EM OPTION

5-15/16" [151mm] 5-15/16" [151mm] 7-11 /16" [195mm]

MEDIUM 5-7/8" [149mm] 5-7/8" [149mm] 7-5/8" [194mm

WIDE 5-1/2" [140mm] 5-1/2" [140mm] 6-13/16" [173mm]

SHALLOW TRIM 5-1/2" [140mm] NA NA

5-1/2"

[141mm]

11-15/16"

[303mm]

16-3/4"

[426mm]

6-3/8"

[161mm]

[176mm]

MAX HEIGHT

(SEE TABLE)

13-3/4"

[349mm]

11-1/8"

[283mm]

TD520041EN

2017-05-01 16:29:35

Catalog #

Type

Date

Project

Comments

Prepared by

Summary of content (4 pages)

PAGE 1
Portfolio D ES C R IPTION 6 inch LED recessed narrow, medium, or wide beam downlight designed for glare free even illumination. Featuring a two-stage diffused reflector system producing smooth distribution with excellent light control and low aperture brightness. Lumen packages range from 1000 to 7000 with color temperatures of 2400K, 2700K, 3000K, 3500K, 4000K, and 5000K.
PAGE 2
LD6B EU6B 6LBW 6LBM 6LBN ORDER IN G INFOR M A TION SAMPLE NUMBER: LD6B15D010EMBOD Housing Lumens1 Voltage Driver Options LD6B=LED Downlight 6” Nominal Aperture LD6BCP=LED Downlight 6” Nominal Aperture, Chicago Plenum 10=1000 lumens 15=1500 lumens 20=2000 lumens 30=3000 lumens 40=4000 lumens 50=5000 lumens10 60=6000 lumens10 70=7000 lumens10 Blank=120-277V 1000 - 4000 Lumen D010=0-10V Dimming, 1% to 100%, 120V-277V D010TR=0-10V or Line Voltage Dimming, 5% to 100%, 120V-277V DE010=0-10V Dimming, 0% t
PAGE 3
LD6B EU6B 6LBW 6LBM 6LBN PH OTOM ETR Y NARROW (30° BEAM) Test Number P201217 Housing LD6B15D010 Module EU6B10208035 Trim 6LBN1LI Lumens 1195 Efficacy 83.6 Lm/ W SC 0.53 CANDLEPOWER DISTRIBUTION Degrees Vertical Downlight 90º 677 75º 60º 1354 45º 2709 Test Number P201215 Housing LD6B15D010 Module EU6B10208035 Trim 6LBM1LI Lumens 1345 Efficacy 94.1 Lm/ W SC 0.
PAGE 4
LD6B EU6B 6LBW 6LBM 6LBN PH OTOM ETR Y NARROW (30° BEAM) Test Number P201218 Housing LD6B40D010 Module EU6B30508035 Trim 6LBN1LI Lumens 3404 Efficacy 81.4 Lm/ W SC 0.53 CANDLEPOWER DISTRIBUTION Degrees Vertical Downlight 90º 1929 75º 60º 3858 45º 7716 Test Number P201216 Housing LD6B40D010 Module EU6B30508035 Trim 6LBM1LI Lumens 3831 Efficacy 91.7 Lm/ W SC 0.