Specification Sheet

IRIS
®
Specifications and dimensions subject to change without notice.
Consult your representative for additional options and finishes.
ADI131104
07-18-2016
Frame
Galvanized steel plaster frame
with integral bar hanger receivers.
Setscrews provide positive horizontal
locking. Integral gun sights facilitate
the use of guide strings or laser lines.
Shipped with overspray protector
installed.
Housing
Steel housing painted matte black
for visually dark interior. Removable
access panels allow splice inspection
and service of all electrical
components including LED module
and driver from below the ceiling thru
the aperture. Removable hinged top
allow top access. All fasteners are
captive.
Bar Hangers
Captive preinstalled bar hangers
adjust from 8-1/2” to 24” wide; pass
thru feature allows shortening without
removal. Captive nail penetrates
standard and engineered lumber.
Mounting flange levels platform with
ceiling. Integral clip attached directly
to tee-bar.
Universal Mounting Bracket
Accepts ½” EMT, C channel and bar
hangers and adjusts 3” vertically from
above the ceiling.
Gaskets
Closed cell gaskets achieve restrictive
airflow requirements without
additional caulking.
Adjustment Mechanism
Dynamic aiming rotates 365°, tilts
45° and locks in position. Angle
markings assist in repeatable settings.
Translating center beam optics aligns
axis of primary reflector with aperture
from nadir to 45°.
LED Module
Field replaceable module utilizes Cree
®
MT-G2 LED array and conforms to
Zhaga standards for interchangeability.
Proximity phosphors over chip on
board LEDs provide a uniform source
with high efficiency and no pixilation.
Color accuracy within 2 SDCM and
optional 90 CRI provides excellent
color. Passive cooling achieves L70 at
40,000 hours.
Primary Optic
Borosilicate glass segmented optic
with > 95% reflective multi-layer hard
coating delivers a highly efficient and
uniform beam. Various distributions
are available and can be interchanged
without tools. Elastomeric glare shield
accepts theatrical color filters and
diffusion films.
Media
Optional media holder accepts one or
two 2 inch [50mm] diameter L series
color filters or beam modifying lens.
Order media holder, color filters and
lens separately.
Lower Reflector
Spun 0.04” thick aluminum angle
cut parabolic contour provides 50°
room side cutoff and is available in a
wide range of specular and semi-
specular Alzak
®
finishes. Light trap
eliminates spill light at edge of flange
and reflector. Metal trim ring can
be removed for painting and can be
installed flush mount with optional
flush mount collar accessory.
Trim Retention
Retained with two torsion springs
holding the flange tightly to
the finished ceiling surface and
accommodates ceiling thickness from
1/2” - 1” thick. Use optional plaster lip
extender for ceilings up to 2" thick.
Junction Box
(6) 1/2” and (2) 3/4” trade size pry outs
positioned to allow straight conduit
runs.
Driver
Integral constant current driver
provides noise free operation.
Continuous, flicker-free 1% dimming,
available with 2 or 3 wire phase cut
and EcoSystem/DALI digital control
interfaces. The DALI option is Fifth
Light compatible.
Compliance
Type Non-IC inherently protected and
cULus listed for damp locations.
Insulation must be kept 3" from top
and sides on housing. Restrictive
airflow per ASTM-E283. EMI/RFI
emissions per FCC 47CFR Part
18 consumer limits. Contains no
mercury or lead and RoHS compliant.
Photometric testing in accordance with
IES LM-79-08. Lumen maintenance
projections in accordance with IES
LM-80-08 and TM-21-11. Meets
California Title 24 residential fixture
program and listed on appliance
database. Energy Star listed. Zhaga
compliant. Meets EMI/RFI emission
per FCC 47CFR Part 18 consumer limits
at 120V input. Lighting Facts Labeled.
Warranty
5 year warranty.
3-1/2" [89mm]
4-3/8" [112mm]
5-1/8" [130mm]
SF= 4-7/8" O.D.
DESCRIPTION
SPECIFICATION FEATURES
Recessed 3.5” aperture directional luminaire with angle cut
shielding reflector utilizing a LED array. Housing is air tight
and suitable for 2x8 residential or commercial constructions.
Insulation must be kept 3" from top and sides on housing.
Housing platform + primary reflector + optical element
combination supports various distributions and reflector types
providing design flexibility. Use where excellent light control and
low aperture brightness are demanded.
Catalog #
Type
Project
Comments
Date
Prepared By
PN3LED12
E3AA, E3AA20
LED Directional Angle Cut and
Shallow Angle Cut
3.5" Aperture
1,200 Lumen Series
Cooper Lighting is a
founding member of the
Zhaga Consortium
16 7/8"
[429mm]
12"
[305mm]
6"
[152mm]
10"
[254mm]
6 7/16"
[164mm]
E Driver Option
Input Voltage 120V 277V
Input Current (A) 0.16 0.08
Input Power (W) 19.5 20
Inrush Current (A) 0.24 0.5
THD: ≤ 20%
PF: ≥ 0.90
T Ambient: -20 to +40°C
T Plenum: +65°C Max.
Sound Rating: Class A
E010 Driver Option
Input Voltage 120V 277V
Input Current (A) 0.17 0.08
Input Power (W) 20 20.7
Inrush Current (A) 0.7 1.21
THD: ≤ 20%
PF: ≥ 0.90
T Ambient: -20 to +40°C
T Plenum: +65°C Max.
Sound Rating: Class A