Specification Sheet

Specifications and
dimensions subject to
change without notice.
Eaton
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.eaton.com/lighting
PRV PREVAIL
TD500018EN
June 19, 2018 2:34 PM
page 3
0-10V (D)
This fixture is offered standard with 0-10V dimming driver(s). The dimming option provides 0-10V dimming wire leads for use with a lighting control
panel or other control method.
Photocontrol (PER and PER7)
Photocontrol receptacles (PER and PER7) provide a flexible solution to enable “dusk-to-dawn” lighting by sensing light levels. Advanced control
systems compatible with NEMA 7-pin standards can be utilized with the PER7 receptacle.
Dimming Occupancy Sensor (MSP/DIM-LXX, MSP/X-LXX and MSP-LXX)
These sensors are factory installed in the luminaire housing. When the MSP/DIM-LXX sensor option is selected, the occupancy sensor is connected
to a dimming driver and the entire luminaire dims when there is no activity detected. When activity is detected, the luminaire returns to full light
output. The MSP/DIM sensor is factory preset to dim down to approximately 50 percent power with a time delay of five minutes. The MSP-LXX
sensor is factory preset to turn the luminaire off after five minutes of no activity.
Thes
e occupancy sensors includes an integral photocell that can be activated with the ISHH-01 accessory for “dusk-to-dawn” control or daylight
harvesting -- the factory preset is OFF. The ISHH-01 is a wireless tool utilized for changing the dimming level, time delay, sensitivity and other
parameters. A variety of sensor lens are available to optimize the coverage pattern for mounting heights from 8’-30’.
LumaWatt Pro Wireless Control and Monitoring System (LWR-LW and LWR-LN)
The Eaton’s LumaWatt Pro powered by Enlighted is a connected lighting solution that combines a broad selection of energy-efficient LED luminaires
with a powerful integrated wireless sensor system. The sensor controls the lighting system in compliance with the latest energy codes and collects
valuable data about building performance and use. Software applications turn the granular data into information through energy dashboards and
specialized apps that make it simple and help optimize the use of building resources, beyond lighting.
0
0
20
30
40
16
24 8180
Coverage Side Area (Feet)
For mounting heights from 8' to 16' (LWR-LW)
For mounting heights from 16' to 40' (LWR-LN)
Coverage Side Area (Feet)
01020304010203040
81824
WaveLinx Wireless Outdoor Lighting Control Module (WOLC-7P-10A)
The 7-pin wireless outdoor lighting control module enables WaveLinx to control outdoor area, site and flood lighting. WaveLinx controls
outdoor lighting using schedules to provide ON, OFF and dimming controls based on astronomic or time schedules based on a 7 day week.
0
20
30
For mounting heights from 12' to 30' (-L30)
Coverage Side Area (Feet)
07.5 15 22 307. 5152230
0
12
10 0
Coverage Side Area (Feet)
For mounting heights from 8' to 12' (-L12)
10 15 20
8
20 15 5 5
CONTROL OPTIONS