Specification Sheet
ADV141377
10/07/2015
Catalog #
Project
Comments
Prepared by
Type
Date
HALO
SPECIFICATION FEATURES
DESCRIPTION
The Halo Surface LED Downlight (SLD) incorporates WaveStream™
technology to create an ultra-low profile surface mounting luminaire with
the performance and look of a traditional downlight. SLD4 is designed
for installation in many 3-1/2” and 4” round or octagon junction boxes.
Dedicated LED wiring connector meets high-efficacy code requirement
in recessed downlighting. Suitable for residential or commercial
installations. Ideal for closets, storage areas, attics and basements.
Compliant with NFPA
®
70, NEC
®
Section 410.16 (A)(3) and 410.16 (C)(5).
CONSTRUCTION
• Die cast aluminum trim ring and
die formed aluminum frame
OPTICS
• WaveStream™ technology
provides uniform luminance
from a low profile flat lens
• AccuAim™ optics provide
directional control for the
“cone-of-light” beam distribution
of a traditional downlight
• Precision molded lens features
high transmission polymer with
UV stabilized protecting film
DESIGNER TRIMS
Accessories (sold separately)
SLD designer trims are accessory
rings that attach to the SLD for a
permanent finish. Refer to SLD
accessories specification sheet for
details.
•
White (P
aintable)
• Satin Nickel
•
T
uscan Bronze
ELECTRICAL JUNCTION BOX
MOUNTING
• SLD may be used in compatible
electrical junction boxes in direct
contact with insulation including
spray foam insulation
• Suitable for installation in many
3-1/2” and 4” octagon and round
electrical junction boxes.
Note: Driver consumes 3 cubic
inches of junction box.
• Surface mounting in a fire-rated
ceiling using an appropriate
electrical box offers a cost-
effective alternative to fire-rated
recessed housings
Note: Fire-rating is per the rating
of the ceiling and applicable
junction box, not the SLD.
• Installer must ensure
compatibility of fit, wiring and
proper mounting in the
electrical junction box. This
includes all applicable national
and local electrical and building
codes
• Proprietary Slot-N-Lock quick
installation system for junction
box installation
• T-bracket with Slot-N-Lock
mounting tabs included
LED
• Trilateral linear LED assembly is
integrated in trim perimeter.
• Color Temperature: 2700K,
3000K, 3500K, 4000K
• CRI options: 80 and 90
-
90 CRI can be used for
California Title 24 compliance/
cer
tified to Title 20
- 80 CRI can be used to comply
with California
Title 24 Non-
Residential Lighting Controls
as a LED luminaire.
• L70 at 50,000 hours projected
in accordance with TM-21
WARRANTY
Cooper Lighting provides a five
year limited warranty on the SLD
LED
LED CHROMATICITY
• A tight chromaticity specification
ensures LED color uniformity,
sustainable Color Rendering
Index (CRI) and Correlated
Color Temperature (CCT) over
the useful life of the LED
• LED chromaticity of 3 SDCM
exceeds ENERGY STAR
®
color
standards per ANSI C78.377-2008
• 90 CRI model features high color
performance with R9 greater
than 50
• Every Halo LED is quality tested,
measured, and serialized in a
permanent record to register
lumens, wattage, CRI and CCT.
• Halo LED serialized testing and
measurement ensures color
and lumen consistency on a
per-unit basis, and validates
long-term product consistency
over time
ELECTRICAL CONNECTIONS
Junction Box
• Compatible with many 3-1/2”
x 2” and 4” x 1-1/2” round and
octagon boxes (2-1/8” deep
boxes recommended)
• Supply Wire Adapter with LED
quick connector included
LED DRIVER
• Driver is a 120V input high
efficiency, dimmable electronic
power supply providing DC power
to the LED array
• Driver features high power factor,
low THD, and has integral thermal
protection in the event of over
temperature or internal failure.
• Driver is replaceable if it should
be required
DIMMING
• Designed for continuous
dimming capability to nominally
5% with many 120V Leading
Edge (LE) and Trailing Edge
(TE) phase control dimmers.
Dimming to 5% is best assured
using dimmers with low end
trim adjustment. Consult dimmer
manufacturer for compatibility
and conditions of use. (Note
some dimmers require a neutral
in the wallbox.)
COMPLIANCE
• cULus Listed ceiling and wall
•
cULus Damp L
ocation listed
ceiling and wall
•
cULus
Wet Location Listed,
ceiling only (shower rated)
SLD4058xxWHJB
80CRI
2700K, 3000K, 3500K,
and 4000K
SLD4059xxWHJB
90CRI
2700K, 3000K, 3500K,
and 4000K
4” Surface LED
Downlight
Suitable for
ceiling or wall
electrical junction boxes
ENERGY DATA
80 CRI 90 CRI
Lumens
(4000K models)
800 710
Input Voltage 120V 120V
Frequency 50/60 Hz 50/60 Hz
Input Current 0.10 A 0.10 A
Input Power 12.2 W 12 W
Efficiency
(4000K models)
66 lm/W 59 lm/W
THD ≤ 20%
Power Factor ≥ 0.90
T Ambient -30 - +40°C
Sound Rating Class A
continued...
NOMENCLATURE
SLD405830 WH JB
405
= 4” SLD
8 = >80 CRI
30
= 30
00K
WH = Matte White
JB
= J
unction Box kit only
2700K
nominal
80
CRI
2700K
3500K
4000K
3000K
80
CRI
2700K
3500K
4000K
3000K
3500K
nominal
80
CRI
2700K
3500K
4000K
3000K
4000K
nominal
80
CRI
2700K
3500K
4000K
3000K
2700K
nominal
90
CRI
2700K
3500K
4000K
3000K
3500K
nominal
90
CRI
2700K
3500K
4000K
3000K
4000K
nominal
90
CRI
2700K
3500K
4000K
3000K
nominal CCT
90
CRI
2700K
3500K
4000K
3000K
nominal CCT
2700K
nominal
80
CRI
2700K
3500K
4000K
3000K
80
CRI
2700K
3500K
4000K
3000K
3500K
nominal
80
CRI
2700K
3500K
4000K
3000K
4000K
nominal
80
CRI
2700K
3500K
4000K
3000K
2700K
nominal
90
CRI
2700K
3500K
4000K
3000K
3500K
nominal
90
CRI
2700K
3500K
4000K
3000K
4000K
nominal
90
CRI
2700K
3500K
4000K
3000K
nominal CCT
90
CRI
2700K
3500K
4000K
3000K
nominal CCT
Refer to ENERGY STAR
®
Certified Products List.
Can be used to comply with California Title 24 High Efficacy requirements.
Certified to California Title 20 Appliance Efficiency Database.
Refer to ENERGY STAR
®
Certified Products List.
Can be used to comply with California Title 24 Non-Residential
Lighting Controls requirements as a LED Luminaire.
90CRI
LED
80CRI
LED
Refer to ENERGY STAR
®
Certified Products List.
Can be used to comply with California Title 24 High Efficacy requirements.
Certified to California Title 20 Appliance Efficiency Database.
Refer to ENERGY STAR
®
Certified Products List.
Can be used to comply with California Title 24 Non-Residential
Lighting Controls requirements as a LED Luminaire.
90CRI
LED
80CRI
LED