Specification Sheet

ManualsBrandsEaton Lighting ManualsHaloHalo Single Light 7-3/4" Wide LED Flush Mount - 80 CRI / 3500K

ADV142256

10/07/2015

Catalog #

Project

Comments

Prepared by

Type

Date

HALO

SPECIFICATION FEATURES

DESCRIPTION

The Halo Surface LED Downlight (SLD) incorporates WaveStream™

technology to create an ultra-low profile surface mounting luminaire with

the performance and look of a traditional downlight. SLD6 is designed

for installation in many 3-1/2” and 4” square, octagon or round junction

boxes. And may also retrofit in 5” and 6” IC and Non-IC recessed

housings.* Suitable for residential or commercial installations. Ideal for

closets, storage areas, attics and basements. Compliant with NFPA

70,

NEC

Section 410.16 (A)(3) and 410.16 (C)(5).

CONSTRUCTION

•

Die cast aluminum trim ring, and

die formed aluminum frame

OPTICS

•

WaveStream™ technology

pro

vides uniform luminance

from a low profile flat lens

•

AccuAim™ optics pro

vide

directional control for the

“cone-of-light” beam distribution

of a traditional downlight.

•

recision molded lens features

high transmission polymer with

UV stabilized protecting film

DESIGNER TRIMS

Accessories (sold separately)

SLD designer trims are accessory

rings that attach to the SLD for a

permanent finish. Refer to SLD

accessories specification sheet for

details.

•

White (P

aintable)

• Satin Nickel

•

uscan Bronze

ELECTRICAL JUNCTION BOX

MOUNTING

• SLD may be used in compatible

electrical junction boxes in direct

contact with insulation including

spray foam insulation

• Suitable for installation in many

3-1/2” and 4” square, octagon,

and round electrical junction

boxes

Note: Driver consumes 3 cubic

inches of junction box

• Surface mounting in a fire-rated

ceiling using an appropriate

electrical box offers a cost-

effective alternative to fire-rated

recessed housings

Not

e: Fire-rating is per the rating

of the ceiling and applicable

junction box, not the SLD.

• Installer must ensure

compatibility of fit, wiring and

proper mounting in the

electrical junction bo

x. This

includes all applicable national

and local electrical and building

codes

• Proprietary Slot-N-Lock quick

installation system for junction

box installation

•

-bracket with Slot-N-Lock

mounting tabs included

RECESSED HOUSING MOUNTING

• May be installed in IC recessed

housings in direct contact with

insulation

Not

e: Not for use in recessed

housings in direct contact with

spray foam insulation. Refer to

NEMA LSD 57-2013

Torsion Spring 5” & 6”

• Optional precision formed torsion

spring bracket kit is included

• The torsion springs adjust on the

frame to fit 5” or 6” compatible

housings

Friction Blade 5” & 6”

• Optional precision formed friction

blades included

• For retrofit in 5” and 6” housings

without torsion spring mounting

tabs

•

riction blade design allows the

SLD to be installed in any position

within the housing aperture (360

degrees)

LED

• Trilateral linear LED assembly is

integrated in trim perimeter

•

Color Temperature: 2700K, 3000K,

3500K, 4000K

• CRI options: 80 and 90

90 CRI can be used for

California Title 24 compliance/

cer

tified to Title 20

- 80 CRI can be used to comply

with California

Title 24 Non-

Residential Lighting Controls

as a LED luminaire.

•

L70 at 50,000 hours projected

in accordance with

TM-21

WARRANTY

Cooper Lighting provides a five

year limited warranty on the SLD

LED

LED CHROMATICITY

•

A tight c

hromaticity specification

ensures LED color uniformity,

sustainable Color R

endering

Index (CRI) and Correlated

Color

Temperature (CCT) over

the useful life of the LED

•

LED c

hromaticity of 3 SDCM

exceeds ENERGY STAR

color standards per

ANSI.

• 90 CRI model features high color

performance with R9 greater than

•

Every Halo LED is quality tested,

measured, and serializ

ed in a

permanent record to register

lumens, wattage, CRI and CCT.

•

Halo LED serializ

ed testing and

measurement ensures color

and lumen consistency on a

per-unit basis, and validates

long-term product consistency

over time

ELECTRICAL CONNECTIONS

Junction Box

•

Compatible with 3-1/2” x 2” and

4” x 1

-1/2” deep round, square

and octagon boxes (2-1/8” deep

boxes recommended)

• Supply Wire Adapter with LED

quick connector included

Recessed Housings

•

LED connector is compatible with

Halo 5” H550 S

eries and 6” H750

Series LED Housings

• LED Connector meets California

itle-24 high-efficacy luminaire

standard as a non-screw base

•

The included E26 Edison

screw-base adapter provides

capability for retrofit

•

LED connector is a non-

screwbase luminaire disconnect

for tool-less installation

SLD 600 Series

SLD6068xxWH

80CRI

2700K, 3000K, 3500K,

and 4000K

SLD6069xxWH

90CRI

2700K, 3000K, 3500K,

and 4000K

6” Surface LED

Downlight

Suitable for

ceiling or wall

electrical junction boxes

Suitable for

5” & 6” recessed

housing retrofit

(IC, Non-IC & AIR-TITE™)

ENERGY DATA

80 CRI 90 CRI

Lumens

(4000K models)

800 780

Input Voltage 120V 120V

Frequency 50/60 Hz 50/60 Hz

Input Current 0.10 A 0.11 A

Input Power 12.2 W 13.2 W

Efficiency

(4000K models)

66 lm/W 59 lm/W

THD ≤ 20%

Power Factor ≥ 0.90

T Ambient -30 - +40°C

Sound Rating Class A

2700K

nominal

CRI

2700K

3500K

4000K

3000K

CRI

2700K

3500K

4000K

3000K

3500K

nominal

CRI

2700K

3500K

4000K

3000K

4000K

nominal

CRI

2700K

3500K

4000K

3000K

2700K

nominal

CRI

2700K

3500K

4000K

3000K

3500K

nominal

CRI

2700K

3500K

4000K

3000K

4000K

nominal

CRI

2700K

3500K

4000K

3000K

nominal CCT

CRI

2700K

3500K

4000K

3000K

nominal CCT

2700K

nominal

CRI

2700K

3500K

4000K

3000K

CRI

2700K

3500K

4000K

3000K

3500K

nominal

CRI

2700K

3500K

4000K

3000K

4000K

nominal

CRI

2700K

3500K

4000K

3000K

2700K

nominal

CRI

2700K

3500K

4000K

3000K

3500K

nominal

CRI

2700K

3500K

4000K

3000K

4000K

nominal

CRI

2700K

3500K

4000K

3000K

nominal CCT

CRI

2700K

3500K

4000K

3000K

nominal CCT

Refer to ENERGY STAR

Certified Products List.

Can be used to comply with California Title 24 High Efficacy requirements.

Certified to California Title 20 Appliance Efficiency Database.

Refer to ENERGY STAR

Certified Products List.

Can be used to comply with California Title 24 Non-Residential

Lighting Controls requirements as a LED Luminaire.

90CRI

LED

80CRI

LED

Refer to ENERGY STAR

Certified Products List.

Can be used to comply with California Title 24 High Efficacy requirements.

Certified to California Title 20 Appliance Efficiency Database.

Refer to ENERGY STAR

Certified Products List.

Can be used to comply with California Title 24 Non-Residential

Lighting Controls requirements as a LED Luminaire.

90CRI

LED

80CRI

LED

NOMENCLATURE

SLD606830 WH

606

= 6” SLD 60

0 Series

8 = >80 CRI

= 30

00K

WH = Matte White

Summary of content (5 pages)

PAGE 1
HALO DESCRIPTION Type Catalog # The Halo Surface LED Downlight (SLD) incorporates WaveStream™ technology to create an ultra-low profile surface mounting luminaire with the performance and look of a traditional downlight. SLD6 is designed for installation in many 3-1/2” and 4” square, octagon or round junction boxes. And may also retrofit in 5” and 6” IC and Non-IC recessed housings.* Suitable for residential or commercial installations. Ideal for closets, storage areas, attics and basements.
PAGE 2
HALO SLD6068xxWH SLD6069xxWH COMPLIANCE • cULus Listed ceiling and wall • cULus Damp Location listed ceiling and wall • cULus Wet Location Listed, ceiling only (shower rated) • Suitable for use in closets, compliant with NFPA® 70, NEC® Section 410.16 (A)(3) and 410.
PAGE 3
HALO SLD6068xxWH SLD6069xxWH HOUSING COMPATIBILITY The SLD6 is UL Listed in Halo and All-Pro recessed housings, and is UL Classified for use with any 5 or 6 inch diameter recessed housing constructed of steel or aluminum with an internal volume that exceeds 107.9 in³ in addition to those noted below. Note: Some other’s housings require installation with included friction clips.
PAGE 4
HALO SLD6068xxWH SLD6069xxWH COMPATIBLE WITH EATON’S CROUSE-HINDS JUNCTION BOXES TP316 for non-metallic cable 4” x 4” x 2-1/8” (102mm x 102mm x 54mm) TP317 for metal clad cable 4” x 4” x 2-1/8” (102mm x 102mm x 54mm) • TP316 - for non-metallic cable • TP317 - for metal clad cable • UL Listed • Suitable for two-hour fire-rated ANSI/UL 263 when properly installed in a fire-rated ceiling or wall • Refer to www.crouse-hinds.
PAGE 5
HALO SLD6068xxWH SLD6069xxWH PRODUCT DATA Cat No. CRI CCT Lumens Power (W) LPW SLD606827WH 80 2700 727 12.2 60 SLD606830WH 80 3000 760 12.2 62 SLD606835WH 80 3500 780 12.2 64 SLD606840WH 80 4000 800 12.2 66 SLD606927WH 92 2700 710 13.2 54 SLD606930WH 92 3000 735 13.2 56 SLD606935WH 92 3500 760 13.2 58 SLD606940WH 92 4000 780 13.2 59 Performance values are presented as typical for the model(s) indicated. Field results may vary.