Specification Sheet

Fail-Safe
SPECIFICATION FEATURES
Housing
Shallow casting is die-cast
aluminum. Backplate constructed
of 16 gauge aluminum.
Face Plate Finish
Injection-molded polycarbonate
color is matte black standard, matte
white painted, or bronze painted.
Border paint option is a premium
baked-on finish. For custom
colors, provide manufacturer paint
number, RAL number or color chip.
Shallow Casting Finish
Polyester powder-coat paint
applied in a five-stage process,
2.0 mil thickness, and baked on
at 400° F. Finish is TGIC, textured,
thermoset, polyester powder-coat.
Mounting
Surface, ceiling or wall. Interior or
exterior.
Gasket
Die-cut closed-cell silicone gasket
seals lens to casting. Gasket is
secured with adhesive, and locked
in place to the back casting. When
the casting is not required, the
gasket is mechanically attached to
the back plate. One gasket seals the
fixture.
Lens
One-piece, injection-molded opal
or clear polycarbonate, 0.125”
thick. Attached with 4 recessed
T20 stainless-steel TORX®-head
fasteners.
Lens Lifetime Warranty.
Decorative Faces
High-impact, injection molded,
0.125” minimum thickness,
polycarbonate overlay attached
to lens with two recessed T20
stainless steel TORX®-head
fasteners. Eyelid offers optimal
lamp shielding. Open face is lens
for continuous radial light pattern.
Border face utilizes the standard
open lens with paint on the border,
eliminating backlit halo effect.
Electrical
LED driver is mounted to the
backpan for optimal thermal
management. High efficiency
LED mounted to ciruit board. 70%
lumen maintenance at 50,000 hours
when operated in an environment
as noted on the Maximum Ambient
Operating/Option Matrix on the
following page.
Labels
UL/cUL listed for wet locations,
ceiling or wall mount. IP65 rated.
Available to mount on combustible
or non-combustible surfaces.
TR 11 LED
LD4 LED
11" Round
10/15/20/25 Watt
High Abuse
Polycarbonate
Lens Lifetime Warranty
CEILING/WALL
INTERIOR/EXTERIOR
PS519043EN
2017-09-07 13:37:12
The 11" round LED provides exceptional aesthetics with impressive
strength and is available in 10, 15, 20, or 25 watt lumen packages.
Polycarbonate lens, clear or opal, combined with four face plates
provides a choice of different styles. Also, choose a photo control or
motion sensor for control. Choose an emergency battery pack to provide
egress illumination.
DESCRIPTION
RATINGS
UL/CUL listed for wet locations
IP65
Catalog #
Type
Date
Project
Comments
Prepared by
4"
[102mm]
5 5/8"
[143mm]
11 3/8"
[290mm]
FLAT
SHALLOW CASTING
(CSTG)
MOUNTING
Delivered Lumens (5000K)
WattageTRO11 TRB11 TRR11TRF11 TRE11
10
Clear 1175 950 825 775 650
Opal 825 600 600 525 450
15
Clear 1725 1325 1500 1200 930
Opal 1200 825 850 760 600
20
Clear 220018001950 1500 1175
Opal 1500 1100 11 50 1000 725
25
Clear 2630 2190 2333 1831 1410
Opal 1695 1400 1485 1155 890
Open BorderRing
Four
Quadrant
Eyelid
Delivered Lumens in table above are estimated values only.
Refer to LM-79 data files for exact delivered lumen, input wattage and distribution.
TRB/TRR TRF
TRE TRO