Specification Sheet

WP WAL-PAK
27, 32 and 46W
LED
250 - 400W
Pulse Start Metal Halide
250 - 400W
High Pressure Sodium
WALL MOUNT LUMINAIRE
SPECIFICATION FEATURES
Housing
Rugged one-piece die-cast
aluminum housing and hinged,
removable die-cast aluminum
door. One-piece silicone gasket
seals the optical chamber. UL 1598
wet location listed and IP66 ingress
protection rated.
Electrical
Ballasts, LED driver and related
electrical components are hard
mounted to the die-cast housing
for optimal heat sinking and
operating efficiency. Wiring is
extended through a silicone gasket
at the back of the housing. Three
1/2” threaded conduit entry points
allow for thru-branch wiring. LED
thermal management system
incorporates both conduction and
natural convection to transfer
heat rapidly away from LED
source. Integral LED electronic
driver incorporates internal fusing
designed to withstand a 6kV
surge test and is Class 2 rated
for 120-277V with an operating
temperature of -40º to 55ºC. Wal-
Pak LED systems maintain greater
than 93% of the initial light output
after 72,000 hours of operation.
UL listed HID high power factor
ballasts are Class H insulation rated
(high pressure sodium: 250, 400W
[-40ºC / -40ºF]. High efficiency HID
ballasts are available in 120, 208,
240, 277, 347 and 480V.
Optical
Highly reflective anodized
aluminum reflectors provide high
efficiency illumination. Optical
assemblies include impact resistant
borosilicate refractive glass,
and full cutoff IESNA compliant
configurations. Patented, solid
state LED luminaires are thermally
optimized with three lumen
packages. HID models are offered
in horizontal medium or mogul-
based metal halide [MP] or high
pressure sodium [HP] lamps.
Door Assembly
Single point, captive stainless steel
hardware secures the removable
hinged door allowing for ease of
installation and maintenance.
Door assembly is hinged at
the bottom for easy removal,
installation and re-lamping.
Finish
Finished in five-stage super TGIC
polyester powder coat paint, 2.5
mil nominal thickness for superior
protection against fade and
wear. Standard color is bronze.
Additional colors available in
white, grey, bronze, black, dark
platinum and graphite metallic.
Consult your lighting representitive
at Eaton for a complete selection of
standard colors.
Efficiency Standards Notice
Select luminaires are manufactured
to USA and California efficiency
regulations.
TD514018EN
March 2, 2018 10:39 AM
The Lumark Wal-Pak wall luminaire provides traditional architectural
style with high performance energy efficient illumination. Rugged
die-cast aluminum construction, stainless steel hardware along with a
sealed and gasketed optical compartment make the Wal-Pak virtually
impenetrable to contaminants. IP66 Rated. Three available lamp sources
including patented energy efficient LED, pulse start metal halide and high
pressure sodium. UL/cUL wet location listed. The Wal-Pak wall luminaire
is ideal for pathway illumination, building entrances, vehicle ramps,
schools, tunnels, stairways and loading docks.
DESCRIPTION
Lumark
Catalog #
Type
Date
Project
Comments
Prepared by
16-5/8" [422mm]
Small 11-3/8" [290mm]
Large 12-3/4" [323mm]
Small 15" [381mm]
Large 16-1/4" [414mm]
10"
[254mm]
16-5/8" [422mm]
10"
[254mm]
BOROSILICATE GLASS DOOR (GL) FULL CUTOFF DOOR (FC)
DIMENSIONS
TECHNICAL DATA
UL/cUL Wet Location Listed
IP66 Rated
40°C Maximum Ambient Temperature
External Supply Wiring 90°C Minimum
EISA G, ARRA, Title 20 Compliant
LM79 / LM80 Compliant
DesignLights Consortium
®
Qualified*
ENERGY DATA
CWA Ballast Input Watts
200W HPS HPF (250 Watts)
250W MP HPF (283 Watts) G
400W HPS HPF (465 Watts)
400W MP HPF (452 Watts) G
SHIPPING DATA
Approximate Net Weight:
32-42 lbs. (15-19 kgs.)
*www.designlights.org