Data Sheet

ManualsBrandsEaton ManualsActuatorsT0-1-8/E On/Off button 1 pc(s)

DATASHEET - T0-1-8/E

ON-OFF button, T0, 20 A, ﬂush mounting, 1 contact unit(s), Contacts:

2, 45 °, momentary, With 0 (Oﬀ) position, with spring-return from both

directions, 0><1, design no. 8

Part no. T0-1-8/E

Catalog No. 009383



Similar to illustration

Delivery program

Product range   Control switches

Part group reference   T0

Basic function   ON-OFF button

   with black thumb grip and front plate

Contacts   2

Degree of Protection   Front IP65

Design   ﬂush mounting

  

Contact sequence  

Switching angle  ° 45

Switching performance   momentary

With 0 (Oﬀ) position

with spring-return from both directions

Design number   8

Front plate no.  

front plate   0><1

Motor rating AC-23A, 50 - 60 Hz

  

400 V P kW 5.5

Rated uninterrupted current I

A 20

Note on rated uninterrupted current !

  Rated uninterrupted current I

is speciﬁed for max. cross-section.

Number of contact units  contact

unit(s)

Technical data

General

Standards   IEC/EN 60947, VDE 0660, IEC/EN 60204, CSA, UL

Switch-disconnector according to IEC/EN 60947-3

Climatic prooﬁng   Damp heat, constant, to IEC 60068-2-78

Damp heat, cyclic, to IEC 60068-2-30

Ambient temperature   

Open  °C -25 - +50

Enclosed  °C -25 - +40

06/16/2021 Eaton 009383 ED2021 V80.0 EN 1 / 5

Summary of content (5 pages)

PAGE 1
DATASHEET - T0-1-8/E ON-OFF button, T0, 20 A, ﬂush mounting, 1 contact unit(s), Contacts: 2, 45 °, momentary, With 0 (Oﬀ) position, with spring-return from both directions, 0><1, design no. 8 Part no. Catalog No.
PAGE 2
Overvoltage category/pollution degree Rated impulse withstand voltage III/3 Uimp Mechanical shock resistance V AC 6000 g 15 Mounting position As required Contacts Electrical characteristics Rated operational voltage Ue V AC 690 Rated uninterrupted current Iu A 20 Note on rated uninterrupted current !u Rated uninterrupted current Iu is speciﬁed for max. cross-section. Load rating with intermittent operation, class 12 AB 25 % DF x Ie 2 AB 40 % DF x Ie 1.6 AB 60 % DF x Ie 1.
PAGE 3
400 V 415 V P kW 5.5 500 V P kW 7.5 690 V P kW 5.5 230 V Ie A 13.3 400 V 415 V Ie A 13.3 500 V Ie A 13.3 690 V Ie A 7.
PAGE 4
Maximum motor rating Single-phase 120 V AC HP 0.5 200 V AC HP 1 240 V AC HP 1.5 200 V AC HP 3 240 V AC HP 3 480 V AC HP 7.5 600 V AC HP 7.5 Three-phase Short Circuit Current Rating SCCR Basic Rating kA 5 max. Fuse A 50 High fault rating kA 10 max. Fuse A 20, Class J AWG 18 - 14 Terminal capacity Solid or ﬂexible conductor with ferrule Terminal screw M3.5 Tightening torque lb-in 8.
PAGE 5
10.13 Mechanical function The device meets the requirements, provided the information in the instruction leaﬂet (IL) is observed. Technical data ETIM 7.0 Low-voltage industrial components (EG000017) / Control switch (EC002611) Electric engineering, automation, process control engineering / Low-voltage switch technology / Oﬀ-load switch, circuit breaker, control switch / Control switch (ecl@ss10.0.1-27-37-14-14 [ACN998011]) Type of switch On/Oﬀ switch Number of poles 1 Max.